Catalog

Showing 1-36 of 436 item(s)

200412 - Carte Auto V3-40K - NUM

200412

Auto Card V3 / 40K NUM 200412C26 reference NUM 200412 C26 controller card for CNC NUM 750/760.

€310.00

200432 - v2 - Process Card - NUM

200432

Process Card V2 NUM 200432C26 Process Card V2 NUM 200432 reference to C26 CNC NUM 750/760. It comes with its small card "option" of 200420A26 reference.

€330.00

200655 - Memory Card - NUM

200655

NUM 256/512 memory card Reference NUM memory card for 200655 B26 CNC NUM 750/760. Memory Card with 256K of memory (RAM) and 512K (EPROM)

€280.00

939724 - Input Card - NUM

939724

input board NUM 939724 Card 32 input NUM 939724 reference for CNC NUM 750/760.Referenced as under: 939723

€330.00

939725 - Output Card - NUM

939725

Output board NUM 939725D26 NUM card 32 outputs 939725 D26 reference for CNC NUM 750/760. Also referenced as 939726.

€330.00

939970 - Axis Card - NUM

939970

Axis Card NUM 939 970 C26 Axis Card NUM reference 939970C26 to control digital NUM 750/760. Card for connecting 3 axes.

€530.00

939835 - Power Supply - NUM

939835

NUM 760 Power Supply 939835 This power supply (220V/50HZ) is ready to replace your defective part and is sold with a warranty.

€580.00

NT43-ECNT43-0 - Power Supply Module - B&R

NT43-ECNT43-0

This B&R brand power supply and reference NT43-ECNT43-0 belongs to the MULTICONTROL range MULTICONTROL power supply module, 24 VDC input voltage, 100 W output power, relay ready This NT43-ECNT43-0 power supply is at your disposal to replace your defective equipment and has a functional guarantee adapted to your needs.

€240.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

SBSC1115 - Servo Controller - BALDOR

SBSC1115

This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€720.00

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1102 - Servo Controller - BALDOR

SBSC1102

This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,170.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

MDLU2075N00 - Modular servo drive - NUM

MDLU2075N00

This modular servo drive reference MDLU2075N00 and NUM is a servo drive that drives both axis motors and small pin motors. Rated current: 35A, peak current: 75A, heat dissipation: 200W This NUM servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,120.00

3IF260.60-1 - Programmable interface processor - B&R

3IF260.60-1

This B&R programmable interface processor is reference 3IF260.60-1. It belongs to the B&R SYSTEM 2005 serie. Processor or Programmable Interface Processor, 850 Kb SRAM, 1.5 MB flash memory, 1 insertion slot This B&R processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

3DI477.6 - Digital input module - B&R

3DI477.6

This B&R digital input module is reference 3DI477.6. It belongs to the B&R SYSTEM 2005 serie. Digital input modules, 32 inputs 24 VDC, 1 ms switching delay, 8 electrically isolated input groups This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€129.00

7EX270.50-1 - CAN BUS Controller - B&R

7EX270.50-1

This CAN BUS B&R controller is reference 7EX270.50-1. It belongs to the B&R SYSTEM 2003 series. 2003 CAN bus controller, 24 VDC, 4 W power supply, 1 CAN interface,electrically isolated, network capable This CAN BUS B&R controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€440.00

7DM435.7 - Digital mixed module - B&R

7DM435.7

This B&R digital mixed module is reference 7DM435.7. It belongs to the B & R SYSTEM 2003 series. Digital mixed module, 16 inputs 24 VDC, 1 ms, Sink, 16 outputs transistors 24 VDC, 0.5 A. This B&R digital mixed module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€110.00

3IF672.9 - Interface module - B&R

3IF672.9

This B&R interface module is reference 3IF672.9. It belongs to the B&R SYSTEM 2005 serie. Interface module, 1 RS232 interface, 2 CAN interfaces, CAN: electrically isolated, network compatible, insert for CPU and IF modules This B&R interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€430.00

BPH1424N5PA2C01 - AC brushless servomotor - NUM

BPH1424N5PA2C01

This BPH1424N5PA2C01 and NUM brand servomotor is a Lexium BPH series engine. BPH1424N5PA2C01: 22Nm, 15.6A, 480V, 3000rpm This BPH1424N5PA2C01 NUM axis motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,420.00

BPH1424N5TA2L01 - AC brushless servomotor - NUM

BPH1424N5TA2L01

This BPH1424N5TA2L01 and NUM brand servomotor is a NUM BPH series engine. BPH1424N5TA2L01: 22Nm, 15.6A, 480V, 3000rpm This BPH1424N5TA2L01 NUM axis motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,220.00

8V1090.00-2 - Servo drive - B&R

8V1090.00-2

This B&R servo drive has the reference 8V1090.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 8.8 A, 4 kW, network filter, integrated braking resistor and electronic blocking for secure restart. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€2,310.00

BSC1010-24 - Servo Controller - BALDOR

BSC1010-24

This brushless reference drive BSC1010-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC : 320V Output : 10A / AC : O-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

SBSC1110-1 - Servo Controller - BALDOR

SBSC1110-1

This SBSC1110-1 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input : 1AC120V 50/60Hz, 1PH, Output : 10A/ACO-320V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

8V1320.00-2 - Servo drive - B&R

8V1320.00-2

This B&R servo drive has the reference 8V1320.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 34 A, 16 kW, ,line filter, braking resistor, DC bus power supply and electronic secure restart inhibit integrated. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€5,080.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00