Hello, our Live Chat is active. Contact us right now.
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS
6ES5521-8MB11 - Communications Processor  - SIEMENS

6ES5521-8MB11 - Communications Processor - SIEMENS

6ES5521-8MB11

This reference communications processor 6ES5521-8MB11 and SIEMENS brand is integrated into the SIMATIC S5 CP521 range.

SIMATIC S5 SERIAL INTERFACE BASIC PROGRAMMING

This SIEMENS communications processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Supply
Warranty
€490.00
VAT excluded

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The CP 521 SI (Serial Interface) communications module is a powerful I/O module with its own central processor.

A separate manual is available for this module. It can be ordered under the order number 6ES5 998-1UD21.

The following is an overview of the module's mode of operation.
Function

The CP 521 SI can be used for unidirectional and bidirectional data exchange.

Unidirectional Data Exchange
For unidirectional data traffic, the CP 521 is provided with a printer driver. If the printer driver is used, the following must be connected to
the serial interface of the CP 521 SI:
• A printer with TTY interface (active) or
• A printer with V.24 (RS 232C) interface.

This enables you to log process states and process disturbances. The output of messages on the printer does not extend the response time of the programmable controller.

The following messages and texts can be output:
• Message texts, which you have configured on a memory submodule in data blocks DB 2 to 63.
• Time of day and date, which are provided by the module's own clock
• Values for variables which are transmitted to the CP 521 SI via the I/O bus.

The message texts are stored on an EPROM or EEPROM memory submodule (up to 8/16 Kbytes).

Bidirectional Data Exchange
The following drivers are implemented for the bidirectional data exchange:
• ASCII driver, transparent
• ASCII driver, interpreting mode I and interpreting mode II
• ”3964(R)” driver
• SINEC L1 driver, master (point-to-point)
• SINEC L1 driver, slave
• Terminal driver
The use of these drivers enables the transmission of data frames between the CPU and an I/O device connected to the CP 521 SI.

Height
13,5 cm / 5,4 in
Width
4,5 cm / 1,7 in
Length
12 cm / 4,7 in
Weight
0,2 kg / 0,4 lb
Family
SIMATIC S5
Reference
6ES5521-8MB11
Refurbished
3002568090605
300085209375

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

16 other products in the same category: