SI-PROFINET - Interface module - CONTROL TECHNIQUES
This SI-PROFINET interface module from Control Techniques is a programming console from the UNIDRIVE range.
Module compatible with M200, M300, M400,M600, M700 drives
This SI-Safety Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
SI-PROFINET
SI-PROFINET enables communication and interfacing of Unidrive M with PLCs and PROFINET networks.
Features include:
• Two 100 BASE-TX RJ45 connectors with support for 100 Mbps full-duplex connectivity via shielded twisted-pair cable, and automatic cable crossing detection
• Built-in switches allow use of networks in sequence (i.e. daisy-chaining)
• Both ports operate in full duplex mode as a network switch
• Real-time PROFINET class RT_Class_1 and compliance with Class A standards
• Cycle time from 2 ms to 512 ms specified during configuration
• Automatic device replacement using LLDP and DCP protocols
• Network port activity LED indicator
• Up to 64 cyclic I/O slots on the module (maximum of 32 inputs and 32 outputs) configured by the network configuration tool and the GSDML file
• I&M0 to I&M4 identification and maintenance functions supported.
Control Techniques is a leading manufacturer of AC and DC speed variation, servo motors and power conversion technologies for commercial and industrial applications. Their innovative products are used in the most demanding applications, requiring performance, reliability and energy efficiency.
Nidec Control Techniques has been at the forefront of industrial-driven drive technology for more than 40 years. They are dedicated to the advancement of automation. From product development to their headquarters to their 45 automation centers around the world, Nidec Control Techniques provides industry-relevant solutions. They guarantee high performance, reliability and energy efficiency in all applications.