6SN1145-1AA01-0AA0 - Power Supply - SIEMENS
6SN1145-1AA01-0AA0 - Power Supply - SIEMENS
6SN1145-1AA01-0AA0 - Power Supply - SIEMENS
6SN1145-1AA01-0AA0 - Power Supply - SIEMENS
6SN1145-1AA01-0AA0 - Power Supply - SIEMENS
6SN1145-1AA01-0AA0 - Power Supply - SIEMENS

6SN1145-1AA01-0AA0 - Power Supply - SIEMENS

6SN1145-1AA01-0AA0

This SIEMENS (10/25 kw) reference power supply 6SN1145-1AA01-0AA0 is for sale in exchange or standard.

Rechargeable Simodrive 6SN1145-1AA01-0AA0 powered and tested under full load (time test) on Siemens 611D bench.

This power supply is at your disposal to replace your defective hardware and has a functional guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€940.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The entire drive unit is connected to the supply network via the power supply modules. The power supply / recovery module (A / R module) and the non-stabilized supply module (AN module) allow power to be supplied to the DC intermediate circuit. In addition, the A / R, AN and monitoring modules (MS module) also supply power to the electronics of the connected modules.

In the case of the AN module, the energy of the drives reinjected into the intermediate circuit in motor braking mode is converted into thermal energy and dissipated in the environment in the braking resistors to be integrated or added.
If necessary, one or more pulsed resistance modules
(RP modules) can also be integrated within the configuration limits. This module is used to:

- machines with short and short braking cycles, generating a low level of braking energy,

- sets of drive units with low dynamic requirements, particularly for spindle drive.

Adaptation of the network supply modules to the existing network conditions is carried out on switches S1.1 and S1.4.
The drive is designed for use in industrial environments with grounded TN-S and TN-C (VDE 0100, Part 300). For the other network topologies, a transformer equipped with separate windings in the secondary coupling yn must be inserted upstream.

Height
10 cm / 3,9 in
Width
30 cm / 11,8 in
Length
48
Weight
11 kg / 24,2 lbs
Family
SIMODRIVE
Reference
6SN1145-1AA01-0AA0
Refurbished
3004546441058
300834422420

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

12 other products in the same category: