Drives

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

XD-04-MN01 - Servo drive - YASKAWA

XD-04-MN01

This YASKAWA servopack has the reference XD-04-MN01. It corresponds to the range of YASKAWA XtraDRIVE servo drives. Servo drive : Input: 200-230V, 1 PH, 50/60Hz, 2.8A, 400W YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,395.00

XD-02-MN01 - Servo drive - YASKAWA

XD-02-MN01

This YASKAWA servopack has the reference XD-02-MN01. It corresponds to the range of YASKAWA XtraDRIVE servo drives. Servo drive : Input: 200-230V, 1 PH, 50/60Hz, 2.1A, 200W YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,900.00

XD-01-MN01 - Servo drive - YASKAWA

XD-01-MN01

This YASKAWA servopack has the reference XD-01-MN01. It corresponds to the range of YASKAWA XtraDRIVE servo drives. Servo drive : Input: 200-230V, 1 PH, 50/60Hz, 0.91A, 100W YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,260.00