Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-35 of 35 item(s)

On sale!

TLC634 NF - Twin Line Controller - BERGER LAHR

TLC634 NF

This BERGER LAHR drive, reference TLC634 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 3A, 1.5kW, 230/480 Volts, 3 phases. This TLC634 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€500.00

TLC638 NF - Twin Line Controller - BERGER LAHR

TLC638 NF

This BERGER LAHR drive, reference TLC638 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 16A, 8kW, 230/480 Volts, 3 phases. This TLC638 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€840.00

MR-J2-100CT - Servodrive - MITSUBISHI

MR-J2-100CT

This MITSUBISHI servodrive, reference MR-J2-100CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF102 and HC-SF103 Servo Motor This MR-J2-100CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€780.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

MR-J2-10CT - Servodrive - MITSUBISHI

MR-J2-10CT

This MITSUBISHI servodrive, reference MR-J2-10CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF053/13 and HC-MF053/13 Servo Motor This MR-J2-10CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€810.00

MR-J2-70CT - Servodrive - MITSUBISHI

MR-J2-70CT

This MITSUBISHI servodrive, reference MR-J2-70CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-MF73 Servo Motor This MR-J2-70CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,080.00

MR-J2-20CT - Servodrive - MITSUBISHI

MR-J2-20CT

This MITSUBISHI servodrive, reference MR-J2-20CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF023 and HC-MF23 Servo Motor This MR-J2-20CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-40CT - Servodrive - MITSUBISHI

MR-J2-40CT

This MITSUBISHI servodrive, reference MR-J2-40CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF33/43 and HC-MF43 Servo Motor This MR-J2-40CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-60CT - Servodrive - MITSUBISHI

MR-J2-60CT

This MITSUBISHI servodrive, reference MR-J2-60CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF52/53 and HA-FF63 Servo Motor This MR-J2-60CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

MR-J2-200CT - Servodrive - MITSUBISHI

MR-J2-200CT

This MITSUBISHI servodrive, reference MR-J2-200CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF152/202/153/203 and HC-RF103/153 Servo Motor This MR-J2-200CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,420.00

MR-J2-350CT - Servodrive - MITSUBISHI

MR-J2-350CT

This MITSUBISHI servodrive, reference MR-J2-350CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF352/353 and HC-RF203 Servo Motor This MR-J2-350CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,640.00

R7M-A10030-BS1 - Servo motor - OMRON

R7M-A10030-BS1

This OMRON R7M-A10030-BS1 servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 100W, 0.87A, with brake for R7D-AP01H servo drive. This R7M-A10030-BS1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€570.00

R7M-A20030-S1-D - Servo motor - OMRON

R7M-A20030-S1-D

This OMRON R7M-A20030-S1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 200W, 2A without brake for R7D-AP02H servo drive. This R7M-A20030-S1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

R7M-A75030-BS1-D - Servo motor - OMRON

R7M-A75030-BS1-D

This OMRON R7M-A75030-BS1-D servo motor is a SMARTSTEP A series motor. Characteristics: 230V, 750W, 4.4A, with brake for R7D-AP08H servo drive. This R7M-A75030-BS1-D servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,795.00

New product

R7M-A10030-S1 - Servo motor - OMRON

R7M-A10030-S1

This OMRON brand R7M-A10030-S1 servo motor is a SMARTSTEP series motor. Features: 100W 200V 0.87A for R7D-AP01H and XD-01-MN01 servo drive. This OMRON servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€440.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

DST1405P - Variable speed drive - CONTROL TECHNIQUES

DST1405P

This servo motor reference DST1405P and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,940.00