Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-13 of 13 item(s)

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

6FC5447-0AA00-0AA0 - CCU Box - SIEMENS

6FC5447-0AA00-0AA0

This reference drive 6FC5447-0AA00-0AA0 and brand SIEMENS is a drive for SINUMERIK 810D. Module of 2x15A and 1x50A. SINUMERIK 810D BOX CCU-BOX CONTROL BOX ELECTRONIC BOX CCU 3 INTEGR. POWER UNITS: 2 * 6A / 2A FOR 1 * 18 / 36A POWER SUPPLY OR 24A / 32A POWER SUPPLIES FOR MAIN PIN DR.

€1,040.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

6FC5447-0AA00-0AA1 - CCU Box - SIEMENS

6FC5447-0AA00-0AA1

This reference drive 6FC5447-0AA00-0AA1 and brand SIEMENS is a drive for SINUMERIK 810D. Module of 2x15A and 1x50A. SINUMERIK 810D BOX CCU-BOX CONTROL BOX ELECTRONIC BOX CCU 3 INTEGR. POWER UNITS: 2 * 6A / 2A FOR 1 * 18 / 36A POWER SUPPLY OR 24A / 32A POWER SUPPLIES FOR MAIN PIN DR.

€1,895.00

6FC5447-0AA01-0AA0 - CCU Box - SIEMENS

6FC5447-0AA01-0AA0

This reference CCU BOX 6FC5447-0AA01-0AA0 and brand SIEMENS is a drive for SINUMERIK 810D. 2x25 A module SINUMERIK 810D/810 FOR ELECTRONIC CONTROL DEVICE CCU BOX EXT./INT. COOL 2 INTEGR. 2X9A / 18A POWER CIRCUITS FOR POWER DISCS This SIEMENS CCU Box is at your disposal to replace your defective equipment.

€1,930.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

SDS 4021 - Servo Converter - STÖBER

SDS 4021

This variable speed drive for servo motor reference SDS 4021 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4021: Three-phase 230...480V, 2A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€1,725.00

SDS 4011 - Servo Converter - STÖBER

SDS 4011

This variable speed drive for servo motor reference SDS 4011 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4011: Three-phase 230...480V, 1.5A, 1kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€550.00

SDS 4041 - Servo Converter - STÖBER

SDS 4041

This variable speed drive for servo motor reference SDS 4041 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4041: Three-phase 230...480V, 6A, 4kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€2,310.00

SDS 4071 - Servo Converter - STÖBER

SDS 4071

This variable speed drive for servo motor reference SDS 4071 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4071: Three-phase 230...480V, 10A, 7kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€6,180.00

SDS 4101 - Servo Converter - STÖBER

SDS 4101

This variable speed drive for servo motor reference SDS 4101 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4101: Three-phase 230...480V, 14A, 10kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€3,980.00

SDS 4141 - Servo Converter - STÖBER

SDS 4141

This variable speed drive for servo motor reference SDS 4141 and brand Stöber is a variable speed drive from the POSIDYN SDS 4000 range. SDS 4141: Three-phase 230...480V, 20A, 14kVA. This Stöber drive is available to replace your defective equipment and has an appropriate warranty. Drive tested on an engine test bench.

€4,830.00