Drives

This category is made up of:
Frequency converters; Dimmers; DC Controllers; Synchronous controllers; Brushless controllers; Step by step controllers; Starters; Boards and Variable Speed Drives.

Showing 1-36 of 41 item(s)

MKS51A005-503-50 - Servo controller - SEW

MKS51A005-503-50

This reference servo controller MKS51A005-503-50 and SEW brand is a servo controller for three-phase AC motors. MOVIDYN series. Servo controller of 5 kW, 3x380-500 Vac, 50 / 60Hz, 4.5A AC. Switch-mode power supply: 29 W. This SEW drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,280.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

MKS51A010-503-50 - Servo controller - SEW

MKS51A010-503-50

This reference servo controller MKS51A010-503-50 and SEW brand is a servo controller for three-phase AC motors. MOVIDYN series. Servo controller of 10 kW, 3x380-500 Vac, 50 / 60Hz, 9A AC. Switch-mode power supply: 29 W. This SEW drive is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€2,050.00

A06B-6096-H301 - Servo Amplifier Module - FANUC

A06B-6096-H301

This servo amplifier module A06B-6096-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series. Input: 283-325V, 1.85kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 3A. With FSSB interface. This A06B-6096-H301servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Servo...

€2,000.00

A06B-6096-H302 - Servo Amplifier Module - FANUC

A06B-6096-H302

This servo amplifier module A06B-6096-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series. Input: 283-325V, 2.45kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 5.9A. With FSSB interface. This A06B-6096-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€2,600.00

A06B-6096-H303 - Servo Amplifier Module - FANUC

A06B-6096-H303

This servo amplifier module A06B-6096-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.10kW. - Nominal output 230V ~ L axis : 3A, M axis : 5.9A, N axis : 5.9A. With FSSB interface. This A06B-6096-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,200.00

A06B-6096-H304 - Servo Amplifier Module - FANUC

A06B-6096-H304

This servo amplifier module A06B-6096-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With FSSB interface. This A06B-6096-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,900.00

A06B-6096-H305 - Servo Amplifier Module - FANUC

A06B-6096-H305

This servo amplifier module A06B-6096-H305 and brand FANUC is a 3-axis AC drive. SVM3-12/12/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 12.5A. With FSSB interface. This A06B-6096-H305 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,550.00

A06B-6096-H306 - Servo Amplifier Module - FANUC

A06B-6096-H306

This servo amplifier module A06B-6096-H306 and brand FANUC is a 3-axis AC drive. SVM3-12/20/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H306 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,700.00

A06B-6096-H307 - Servo Amplifier Module - FANUC

A06B-6096-H307

This servo amplifier module A06B-6096-H307 and brand FANUC is a 3-axis AC drive. SVM3-20/20/40 series Input:283-325V, 4.35kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H307 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,340.00

A06B-6079-H301 - Servo Amplifier Module - FANUC

A06B-6079-H301

This servo amplifier module A06B-6079-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 3A. With Type A interface. This A06B-6079-H301 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€1,890.00

A06B-6079-H302 - Servo Amplifier Module - FANUC

A06B-6079-H302

This servo amplifier module A06B-6079-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 5.9A. With Type A interface. This A06B-6079-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,000.00

A06B-6079-H303 - Servo Amplifier Module - FANUC

A06B-6079-H303

This servo amplifier module A06B-6079-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.1kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,050.00

A06B-6079-H304 - Servo Amplifier Module - FANUC

A06B-6079-H304

This servo amplifier module A06B-6079-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€1,900.00

BSC1010-24 - Servo Controller - BALDOR

BSC1010-24

This brushless reference drive BSC1010-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC : 320V Output : 10A / AC : O-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

3G3MX2-AB001-E - Servodrive - OMRON

3G3MX2-AB001-E

This OMRON drive and reference 3G3MX2-AB001-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MX2-AB002-E - Servodrive - OMRON

3G3MX2-AB002-E

This OMRON drive and reference 3G3MX2-AB002-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€840.00

3G3MX2-AB004-E - Servodrive - OMRON

3G3MX2-AB004-E

This OMRON drive and reference 3G3MX2-AB004-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€580.00

3G3MX2-AB007-E - Servodrive - OMRON

3G3MX2-AB007-E

This OMRON drive and reference 3G3MX2-AB007-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,400.00

3G3MX2-AB015-E - Servodrive - OMRON

3G3MX2-AB015-E

This OMRON drive and reference 3G3MX2-AB015-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-AB022-E - Servodrive - OMRON

3G3MX2-AB022-E

This OMRON drive and reference 3G3MX2-AB022-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,960.00

3G3MX2-A2001-E - Servodrive - OMRON

3G3MX2-A2001-E

This OMRON drive and reference 3G3MX2-A2001-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,100.00

3G3MX2-A2002-E - Servodrive - OMRON

3G3MX2-A2002-E

This OMRON drive and reference 3G3MX2-A2002-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MX2-A2004-E - Servodrive - OMRON

3G3MX2-A2004-E

This OMRON drive and reference 3G3MX2-A2004-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-A2007-E - Servodrive - OMRON

3G3MX2-A2007-E

This OMRON drive and reference 3G3MX2-A2007-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2015-E - Servodrive - OMRON

3G3MX2-A2015-E

This OMRON drive and reference 3G3MX2-A2015-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2022-E - Servodrive - OMRON

3G3MX2-A2022-E

This OMRON drive and reference 3G3MX2-A2022-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,700.00

3G3MX2-A2037-E - Servodrive - OMRON

3G3MX2-A2037-E

This OMRON drive and reference 3G3MX2-A2037-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 3.7/5.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,815.00

3G3MX2-A2055-E - Servodrive - OMRON

3G3MX2-A2055-E

This OMRON drive and reference 3G3MX2-A2055-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 5.5/7.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,600.00

3G3MX2-A2075-E - Servodrive - OMRON

3G3MX2-A2075-E

This OMRON drive and reference 3G3MX2-A2075-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 7.5/11kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,300.00

3G3MX2-A2110-E - Servodrive - OMRON

3G3MX2-A2110-E

This OMRON drive and reference 3G3MX2-A2110-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 11/15kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,500.00

3G3MX2-A2150-E - Servodrive - OMRON

3G3MX2-A2150-E

This OMRON drive and reference 3G3MX2-A2150-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 15/18.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€5,600.00

MKS51A015-503-50 - Servo controller - SEW

MKS51A015-503-50

This drive with reference MKS51A015-503-50 and SEW brand is a compact module from the MOVIDYN series. Features: 3x380Vac, 13.5A, 14W This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,800.00

MPB51A011-503-00 - Servo controller - SEW

MPB51A011-503-00

This drive with reference MPB51A011-503-00 and SEW brand is a power module from the MOVIDYN series. Features: 3x380Vac, 16A, 14kW This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MPB51A055-503-00 - Servo controller - SEW

MPB51A055-503-00

This drive with reference MPB51A055-503-00 and SEW brand is a power module from the MOVIDYN series. Features: 3x380Vac, 80A, 45kW This SEW drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,200.00