Catalog

Showing 1-36 of 103 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

S3D8-CKF - Sensor Controller - OMRON

S3D8-CKF

This sensor controller OMRON and reference S3D8-CKF belongs to the range S3D8. Controller with 8 inputs and 8 outputs (4 contacts + 4 transistors). Memory in an eeprom. This S3D8-CKF controller is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€140.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

2098-DSD-030 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-030

This reference servo drive 2098-DSD-030 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x15A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,900.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

2098-DSD-005 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-005

This reference servo drive 2098-DSD-005 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x2.5A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€585.00

2098-DSD-010 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-010

This reference servo drive 2098-DSD-010 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x5A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€480.00

2098-DSD-020 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-020

This reference servo drive 2098-DSD-020 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x10A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,150.00

2098-DSD-075 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-075

This reference servo drive 2098-DSD-075 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 35A, 3 phases, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,600.00

2098-DSD-HV030 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV030

This reference servo drive 2098-DSD-HV030 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 7A, 3 phases, 230-460VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,230.00

2098-DSD-HV050 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV050

This reference servo drive 2098-DSD-HV050 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 11A, 3 phases, 230-460VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

2098-DSD-HV100 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV100

This reference servo drive 2098-DSD-HV100 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 23A, 3 phases, 230-460VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,520.00

2098-DSD-HV150 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV150

This reference servo drive 2098-DSD-HV150 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 34A, 3 phases, 230-460VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,600.00

2098-DSD-HV220 - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV220

This reference servo drive 2098-DSD-HV220 and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 47A, 3 phases, 230-460VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,800.00

2098-DSD-HV030-SE - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-HV030-SE

This reference servo drive 2098-DSD-HV030-SE and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 7A, 3 phases, 230-460VAC, 50/60Hz. Sercos interface. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,710.00

2098-DSD-030-SE - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-030-SE

This reference servo drive 2098-DSD-030-SE and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x15A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,890.00

2098-DSD-020-SE - Digital Servo Drive - ALLEN BRADLEY

2098-DSD-020-SE

This reference servo drive 2098-DSD-020-SE and brand ALLEN BRADLEY is a drive of the ULTRA 3000 series. Digital servo drive : 1x10A, 1 phase, 120-240VAC, 50/60Hz. This ALLEN BRADLEY drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,430.00

MQAF01 - PLC Module - MITSUBISHI

MQAF01

MITSUBISHI PLC reference MQAF01 . MELSEC-Q series. Master Module. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€930.00

Q61P-A1 - Power supply - MITSUBISHI

Q61P-A1

MITSUBISHI Power supply reference Q61P-A1. MELSEC-Q series. Features: 100-120VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q61P-A2 - Power supply - MITSUBISHI

Q61P-A2

MITSUBISHI Power supply reference Q61P-A2 . MELSEC-Q series. Features: 200-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q62P - Power supply - MITSUBISHI

Q62P

MITSUBISHI Power supply reference Q62P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q63P - Power supply - MITSUBISHI

Q63P

MITSUBISHI Power supply reference Q63P . MELSEC-Q series. Features: 24VDC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q64P - Power supply - MITSUBISHI

Q64P

MITSUBISHI Power supply reference Q64P. MELSEC-Q series. Features: 100-240VAC -> 5-24VDC This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€80.00

Q00JCPU-E - CPU - MITSUBISHI

Q00JCPU-E

MITSUBISHI CPU reference Q00JCPU-E. MELSEC-Q series. Features: Combination of CPU module (single processor), 5 Slot Base unit and power supply This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,100.00

Q00CPU - CPU - MITSUBISHI

Q00CPU

MITSUBISHI CPU reference Q00CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€70.00

Q01CPU - CPU - MITSUBISHI

Q01CPU

MITSUBISHI CPU reference Q01CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€140.00

Q02CPU - CPU - MITSUBISHI

Q02CPU

MITSUBISHI CPU reference Q02CPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€180.00

Q02HCPU - CPU - MITSUBISHI

Q02HCPU

MITSUBISHI CPU reference Q02HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€160.00

Q06HCPU - CPU - MITSUBISHI

Q06HCPU

MITSUBISHI CPU reference Q06HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€240.00

Q12HCPU - CPU - MITSUBISHI

Q12HCPU

MITSUBISHI CPU reference Q12HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€450.00

Q25HCPU - CPU - MITSUBISHI

Q25HCPU

MITSUBISHI CPU reference Q25HCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€450.00

Q12PHCPU - CPU - MITSUBISHI

Q12PHCPU

MITSUBISHI CPU reference Q12PHCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,400.00

Q25PHCPU - CPU - MITSUBISHI

Q25PHCPU

MITSUBISHI CPU reference Q25PHCPU. MELSEC-Q series. Features: CPU multi processor. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,900.00

Q12PRHCPU - CPU - MITSUBISHI

Q12PRHCPU

MITSUBISHI CPU reference Q12PRHCPU. MELSEC-Q series. Features: Process CPU module, high availability. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€3,900.00