Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Catalog

TDM 1.2-050-300-W1-000 - AC Servo Controller - INDRAMAT

TDM 1.2-050-300-W1-000
This INDRAMAT reference servo controller TDM 1.2-050-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 50A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€470.00

TDM 3.2-030-300-W1 - AC Servo Controller - INDRAMAT

TDM 3.2-030-300-W1
This INDRAMAT reference servo controller TDM 3.2-030-300-W1 is designed for INDRAMAT MAC 63 to MAC 112B engines. Servo controller of 30A. Series 3, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€395.00

TC3000 - Thyristor power unit - EUROTHERM

TC3000
EUROTHERM reference 100A / 400V thyristor power unit TC3000 for the control of electric power on three-phase industrial loads. This EUROTHERM dimmer is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Dimmer refurbished and tested under full load (100% test).
€1,720.00

6AV6641-0BA11-0AX0 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX0
OP SIEMENS reference 6AV6641-0BA11-0AX0 for Simatic HMI. SIMATIC OPERATOR PANEL OP77A BACKLIT LC DISPLAY, 4.5 "DISPLAY W. GRAPHICS CAPABIL MPI- / PROFIBUS-DP INTERFACE UP TO 1,5MB, FOR WINCC CONFIGURATION FLEXIBLE 2004 COMPACT HSP UPWARDS. This OP 6AV6641-0BA11-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to...
€380.00

TDM 1.2-100-300-W1-000 - Servo Drive Module - INDRAMAT

TDM 1.2-100-300-W1-000
This INDRAMAT reference servo controller TDM 1.2-100-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 100A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€490.00

TDM 1.2-030-300-W0 - AC Servo Controller - INDRAMAT

TDM 1.2-030-300-W0
This INDRAMAT reference servo controller TDM 1.2-030-300-W0 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 30A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€620.00

TDM 1.2-030-300-W1-000 - AC Servo Controller - INDRAMAT

TDM 1.2-030-300-W1-000
This INDRAMAT reference servo controller TDM 1.2-030-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 30A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€620.00

TDM 1.3-030-300-W1-000 - AC Servo Controller - INDRAMAT

TDM 1.3-030-300-W1-000
This INDRAMAT reference servo controller TDM 1.3-030-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 30A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€1,500.00

TDM 1.3-050-300-W1-000 - AC Servo Controller - INDRAMAT

TDM 1.3-050-300-W1-000
This INDRAMAT reference servo controller TDM 1.3-050-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 50A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€720.00

TDM 1.3-100-300-W1-000 - AC Servo Controller - INDRAMAT

TDM 1.3-100-300-W1-000
This INDRAMAT reference servo controller TDM 1.3-100-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 100A. Series 1, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€830.00

TDM 3.2-020-300-W0 - AC Servo Controller - INDRAMAT

TDM 3.2-020-300-W0
This INDRAMAT reference servo controller TDM 3.2-020-300-W0 is designed for INDRAMAT MAC 63 to MAC 112B motors. Servo controller of 20A. Series 3, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€195.00

TDM 1.2-050-300-W1 - AC Servo Controller - INDRAMAT

TDM 1.2-050-300-W1
This INDRAMAT reference servo controller TDM 1.2-050-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 50A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€510.00

TDM 1.2-100-300-W1-220 - Servo Drive Module - INDRAMAT

TDM 1.2-100-300-W1-220
This INDRAMAT reference servo controller TDM 1.2-100-300-W1-000 is designed for INDRAMAT MAC 71 to MAC 160 engines. Servo controller of 100A. Series 1, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€515.00

TDM 2.1-030-300-W0 - Servo Drive Module - INDRAMAT

TDM 2.1-030-300-W0
This INDRAMAT reference servo controller TDM 2.1-030-300-W0 is designed for INDRAMAT MAC 63 to MAC 93 engines. Servo controller of 30A. Series 2, Configuration 1. Rated voltage of 300V. Natural convection This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test...
€510.00

TDM 2.1-030-300-W1 - Servo Drive Module - INDRAMAT

TDM 2.1-030-300-W1
This INDRAMAT reference servo controller TDM 2.1-030-300-W1 is designed for INDRAMAT MAC 63 to MAC 93 engines. Servo controller of 30A. Series 2, Configuration 1. Rated voltage of 300V. Forced ventilation. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test...
€480.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H
This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H
This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H
This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H  : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H
This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H
This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H
This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L
This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L
This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L
This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L
This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L
This OMRON servodrive and reference R7D-AP04L  is part of the series SMARTSTEP A.R7D-AP04L  : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.
€760.00

TDM 3.2-020-300-W1 - AC Servo Controller - INDRAMAT

TDM 3.2-020-300-W1
This INDRAMAT reference servo controller TDM 3.2-020-300-W1 is designed for INDRAMAT MAC 63 to MAC 112B motors. Servo controller of 20A. Series 3, Configuration 2. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€2,230.00

TDM 4.1-020-300-W0 - AC Servo Controller - INDRAMAT

TDM 4.1-020-300-W0
This INDRAMAT reference servo controller TDM 4.1-020-300-W0 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. Servo controller of 20A. Series 4, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€620.00

TDM 4.1-020-300-W1 - AC Servo Controller - INDRAMAT

TDM 4.1-020-300-W1
This INDRAMAT reference servo controller TDM 4.1-020-300-W1 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. Servo controller of 20A. Series 4, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€620.00

TDM 4.1-030-300-W1 - AC Servo Controller - INDRAMAT

TDM 4.1-030-300-W1
This INDRAMAT reference servo controller TDM 4.1-030-300-W1 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. Servo controller of 30A. Series 4, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€660.00

TDM 4.3-020-300-W0 - AC Servo Controller - INDRAMAT

TDM 4.3-020-300-W0
This INDRAMAT reference servo controller TDM 4.3-020-300-W0 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. Servo controller of 20A. Series 4, Configuration 3. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€850.00

TDM 6.1-030-300-W1 - AC Servo Controller - INDRAMAT

TDM 6.1-030-300-W1
This INDRAMAT reference servo controller TDM 6.1-030-300-W1 is designed for INDRAMAT MAC 63 and MAC 90. With interface Servo controller of 30A. Series 6, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€1,740.00

TDM 7.1-015-300-W0 - AC Servo Controller - INDRAMAT

TDM 7.1-015-300-W0
This INDRAMAT reference servo controller TDM 7.1-015-300-W0 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. With interface. Servo controller of 15A. Series 7, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€560.00

TDM 7.1-015-300-W1 - AC Servo Controller - INDRAMAT

TDM 7.1-015-300-W1
This INDRAMAT reference servo controller TDM 7.1-015-300-W1 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. With interface. Servo controller of 15A. Series 7, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€840.00

TDM 7.1-030-300-W1 - AC Servo Controller - INDRAMAT

TDM 7.1-030-300-W1
This INDRAMAT reference servo controller TDM 7.1-030-300-W1 is designed for INDRAMAT MAC 21, MAC 25 and MAC 41. With interface. Servo controller of 30A. Series 7, Configuration 1. Rated voltage of 300V. This INDRAMAT controller is at your disposal to replace your defective equipment and has a suitable guarantee. Servo controller tested on engine test bench.
€880.00

6AV6641-0BA11-0AX1 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX1
OP SIEMENS reference 6AV6641-0BA11-0AX1 for Simatic HMI. SIMATIC OP 77A operator panel backlit LC display, 4.5 '' graphic display, MPI- / PROFIBUS-DP interface up to 1.5MB, configurable from WinCC flexible 2004 Compact HSP This OP 6AV6641-0BA11-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€660.00