Catalog

Showing 1-36 of 43 item(s)

MA4/200.7301-M - Robot Controller Module Unit - BOSCH

MA4/200.7301-M

This MA4/200.7301-M and BOSCH reference axis control module is part of the TURBOSCARA SR6, SR6 PLUS and SR8 range. MA4 / 200.7301-M: Input 3AC 230V 50/60 Hz, output: 10 / 7.5 / 5 / 5A. This control module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,145.00

FX3-CPU000000 - Security module - SICK

FX3-CPU000000

This FX3-CPU000000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 24Vdc, category 4. Main module sold without system connector (FX3-MPL000001) This FX3-CPU000000 module from SICK is at your disposal to replace your defective hardware.

€499.00

FX3-MPL000001 - Connector for security module - SICK

FX3-MPL000001

This connector for main module FX3-MPL000001 from the Flexi Soft range is for FX3-CPU0 or FX3-CPU1 modules. System connector: Flexi-Soft system power supply and save system configuration (without EFI-enabled devices). screw terminal blocks This FX3-MPL000001 connector from SICK is at your disposal to replace your defective equipment.

€125.00

FX3-XTDI80002 - I/O module - SICK

FX3-XTDI80002

This FX3-XTDI80002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 8 outputs. Category 4 This FX3-XTDI80002 module from SICK is at your disposal to replace your defective hardware.

€155.00

MR-E-10A - Servo Amplifier - MITSUBISHI

MR-E-10A

This MITSUBISHI drive, reference MR-E-10A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 0.1kW dimmer for HF-KE13 servo motor. This MR-E-10A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€874.00

MR-E-20A - Servo Amplifier - MITSUBISHI

MR-E-20A

This MITSUBISHI drive, reference MR-E-20A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 0.2kW dimmer for HF-KE23 servo motor. This MR-E-20A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€670.00

MR-E-40A - Servo Amplifier - MITSUBISHI

MR-E-40A

This MITSUBISHI drive, reference MR-E-40A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 0.4kW dimmer for HF-KE43 servo motor. This MR-E-40A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€890.00

MR-E-70A - Servo Amplifier - MITSUBISHI

MR-E-70A

This MITSUBISHI drive, reference MR-E-70A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 0.75kW dimmer for HF-KE73 and HF-SE52. servo motor. This MR-E-70A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€915.00

MR-E-100A - Servo Amplifier - MITSUBISHI

MR-E-100A

This MITSUBISHI drive, reference MR-E-100A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 1kW dimmer for HF-SE102 servo motor. This MR-E-100A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€930.00

MR-E-200A - Servo Amplifier - MITSUBISHI

MR-E-200A

This MITSUBISHI drive, reference MR-E-200A is an AC Servo drive. It belongs to the MELSERVO-E Series range. Mitsubishi AC 3-phase 200/240V, 2kW dimmer for HF-SE102 and HF-SE202 servo motor. This MR-E-200A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,090.00

FX0-GCAN00000 - Security module - SICK

FX0-GCAN00000

This FX0-GCAN00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). CANOPEN fieldbus, powered by Flexibus+ This FX0-GCAN00000 module from SICK is at your disposal to replace your defective equipment.

€980.00

FX0-GENT00000 - Security module - SICK

FX0-GENT00000

This FX0-GENT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). ETHERNET fieldbus, powered by Flexibus+ This FX0-GENT00000 module from SICK is at your disposal to replace your defective equipment.

€1,175.00

FX3-XTIO84002 - I/O module - SICK

FX3-XTIO84002

This FX3-XTIO84002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 6 outputs. Category 4 This FX3-XTIO84002 module from SICK is at your disposal to replace your defective hardware.

€495.00

3G3MX2-AB001-E - Servodrive - OMRON

3G3MX2-AB001-E

This OMRON drive and reference 3G3MX2-AB001-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MX2-AB002-E - Servodrive - OMRON

3G3MX2-AB002-E

This OMRON drive and reference 3G3MX2-AB002-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€840.00

3G3MX2-AB004-E - Servodrive - OMRON

3G3MX2-AB004-E

This OMRON drive and reference 3G3MX2-AB004-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€580.00

3G3MX2-AB007-E - Servodrive - OMRON

3G3MX2-AB007-E

This OMRON drive and reference 3G3MX2-AB007-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,400.00

3G3MX2-AB015-E - Servodrive - OMRON

3G3MX2-AB015-E

This OMRON drive and reference 3G3MX2-AB015-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-AB022-E - Servodrive - OMRON

3G3MX2-AB022-E

This OMRON drive and reference 3G3MX2-AB022-E is part of the MX2 series. Characteristics: Single phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,960.00

3G3MX2-A2001-E - Servodrive - OMRON

3G3MX2-A2001-E

This OMRON drive and reference 3G3MX2-A2001-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.1/0.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,100.00

3G3MX2-A2002-E - Servodrive - OMRON

3G3MX2-A2002-E

This OMRON drive and reference 3G3MX2-A2002-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.2/0.4kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MX2-A2004-E - Servodrive - OMRON

3G3MX2-A2004-E

This OMRON drive and reference 3G3MX2-A2004-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.4/0.55kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€900.00

3G3MX2-A2007-E - Servodrive - OMRON

3G3MX2-A2007-E

This OMRON drive and reference 3G3MX2-A2007-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 0.75/1.1kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2015-E - Servodrive - OMRON

3G3MX2-A2015-E

This OMRON drive and reference 3G3MX2-A2015-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 1.5/2.2kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,800.00

3G3MX2-A2022-E - Servodrive - OMRON

3G3MX2-A2022-E

This OMRON drive and reference 3G3MX2-A2022-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 2.2/3kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,700.00

3G3MX2-A2037-E - Servodrive - OMRON

3G3MX2-A2037-E

This OMRON drive and reference 3G3MX2-A2037-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 3.7/5.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,815.00

3G3MX2-A2055-E - Servodrive - OMRON

3G3MX2-A2055-E

This OMRON drive and reference 3G3MX2-A2055-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 5.5/7.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,600.00

3G3MX2-A2075-E - Servodrive - OMRON

3G3MX2-A2075-E

This OMRON drive and reference 3G3MX2-A2075-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 7.5/11kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€1,300.00

3G3MX2-A2110-E - Servodrive - OMRON

3G3MX2-A2110-E

This OMRON drive and reference 3G3MX2-A2110-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 11/15kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,500.00

3G3MX2-A2150-E - Servodrive - OMRON

3G3MX2-A2150-E

This OMRON drive and reference 3G3MX2-A2150-E is part of the MX2 series. Characteristics: Three phase 200/240V AC, 50/60Hz - 15/18.5kW This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€5,600.00

FX3-CPU130002 - Security module - SICK

FX3-CPU130002

This FX3-CPU130002 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). Main module without system connector This module from SICK is at your disposal to replace your defective hardware.

€505.00

FX0-GPRO00000 - Security module - SICK

FX0-GPRO00000

This FX0-GPRO00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). Main module without system connector This module from SICK is at your disposal to replace your defective hardware.

€1,800.00

FX0-GMOD00000 - Security module - SICK

FX0-GMOD00000

This FX0-GMOD00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). Main module without system connector This module from SICK is at your disposal to replace your defective hardware.

€1,600.00

FX0-GPNT00000 - Security module - SICK

FX0-GPNT00000

This FX0-GPNT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). Main module without system connector This module from SICK is at your disposal to replace your defective hardware.

€840.00

FX0-GETC00000 - Security module - SICK

FX0-GETC00000

This FX0-GETC00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). Main module without system connector This module from SICK is at your disposal to replace your defective hardware.

€1,300.00

DSL-8U04G02M025KM1 - Cable - SICK

DSL-8U04G02M025KM1

This DSL-8U04G02M025KM1 connection cable from the Flexi Soft range is used for software (Flexi Soft Designer). USB interface, 2m This SICK brand cable is at your disposal to replace your defective equipment.

€350.00