Catalog

A06B-6055-H322 - Drive - FANUC

A06B-6055-H322

This FANUC 6055 Series and A06B-6055-H322 spindle drive is designed to control FANUC 50P motors. This 3-axis variator is complete, internal radiation type, 4500 rpm This A06B-6055-H322 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,980.00

A06B-6055-H106 - AC Spindle Servo Drive - FANUC

A06B-6055-H106

This FANUC 6055 series and reference A06B-6055-H106 is a 1-axis spindle drive. It is equipped with a FANUC A20B-1001-0120 control board.This A06B-6055-H106 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€2,190.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

6SC6100-0GA00 - Power supply board - SIEMENS

6SC6100-0GA00

This SIEMENS power supply board and 6SC6100-0GA00 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GA00 SIEMENS SIMODRIVE 610/210 VSA FBG. FEEDING AND MONITORING This 6SC6100-0GA00 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board refurbished and tested on...

€850.00

6SC6100-0GB11 - Power supply board - SIEMENS

6SC6100-0GB11

This SIEMENS power supply board and 6SC6100-0GB11 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GB11 SIEMENS SIMODRIVE 610/210 VSA FBG ELECTRICAL POWER SUPPLY AND VOLTAGE LIMITATION This 6SC6100-0GB11 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board...

€520.00

6AV3503-1DB10 - Panel - SIEMENS

6AV3503-1DB10

SIEMENS panel reference 6AV3503-1DB10 from the OP3 range. Operator panel OP3 with connection cable to SIMATIC S7, cable ser. for configuration and power cable This 6AV3503-1DB10 operator panel is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€490.00

FN-XY16SC41 - I/O Module - PROFACE

FN-XY16SC41

This reference I/O module FN-XY16SC41 and PROFACE brand is part of the SP5000 range. 16 discrete points, 16 point input, transistor output This reconditioned and tested PROFACE automaton is at your disposal to replace your defective equipment and has a guarantee.

€385.00