Catalog

Showing 1-16 of 16 item(s)

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

MR-JE-10A - Servo Amplifier - MITSUBISHI

MR-JE-10A

This MITSUBISHI drive, reference MR-JE-10A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 1.1A dimmer fo mitsubishi servo motor This MR-JE-10A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€480.00

MR-JE-20A - Servo Amplifier - MITSUBISHI

MR-JE-20A

This MITSUBISHI drive, reference MR-JE-20A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 1.5A dimmer fo mitsubishi servo motor This MR-JE-20A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€350.00

MR-JE-40A - Servo Amplifier - MITSUBISHI

MR-JE-40A

This MITSUBISHI drive, reference MR-JE-40A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 2.8A dimmer fo mitsubishi servo motor This MR-JE-40A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€364.00

MR-JE-70A - Servo Amplifier - MITSUBISHI

MR-JE-70A

This MITSUBISHI drive, reference MR-JE-70A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 1 or 3 phase 200/240V, 5.8A dimmer fo mitsubishi servo motor This MR-JE-70A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

MR-JE-100A - Servo Amplifier - MITSUBISHI

MR-JE-100A

This MITSUBISHI drive, reference MR-JE-100A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 6A dimmer fo mitsubishi servo motor This MR-JE-100A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

MR-JE-200A - Servo Amplifier - MITSUBISHI

MR-JE-200A

This MITSUBISHI drive, reference MR-JE-200A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 11A dimmer fo mitsubishi servo motor This MR-JE-200A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

MR-JE-300A - Servo Amplifier - MITSUBISHI

MR-JE-300A

This MITSUBISHI drive, reference MR-JE-300A is an AC Servo drive. It belongs to the MELSERVO-JE Series range. Mitsubishi AC 3 phase 200/240V, 11A dimmer fo mitsubishi servo motor This MR-JE-300A drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,645.00

3UACG50150 - Servo drive - NUM

3UACG50150

This spindle drive reference 3UACG50150 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 70A, Max current: 106A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,450.00

3UACM5030 - Servo drive - NUM

3UACM5030

This spindle drive reference 3UACM5030 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 14A, Max current: 21A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,705.00

3UACL5050 - Servo drive - NUM

3UACL5050

This spindle drive reference 3UACL5050 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 24A, Max current: 35A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,650.00

3UACL5075 - Servo drive - NUM

3UACL5075

This spindle drive reference 3UACL5075 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 35A, Max current: 53A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,900.00

3UACG50100 - Servo drive - NUM

3UACG50100

This spindle drive reference 3UACG50100 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 47A, Max current: 70A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,250.00

3UACX50200 - Servo drive - NUM

3UACX50200

This spindle drive reference 3UACX50200 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 94A, Max current: 141A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,870.00