Catalog

Showing 1-29 of 29 item(s)

VW3A3501 - Option Card - TELEMECANIQUE

VW3A3501

Programmable option card for TELEMECANIQUE dimmer. Compatible with Altivar 61; 71, Lift, 61Q and 71Q. 24 volts. 2 analog inputs. 2 analog outputs. Program compilation size: 320 kB maximum.

€320.00

VW3A66206 - Keypad - TELEMECANIQUE

VW3A66206

This console VW3A66206 and brand TELEMECANIQUE is a programming console of the range ALTIVAR66. This VW3A66206 Telemecanique console is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€560.00

VW3A1101 - Keypad - SCHNEIDER ELECTRIC

VW3A1101

This keypad VW3A1101 and brand SCHNEIDER ELECTRIC is a programming console of the range ALTIVAR71. Used for ATV212, ATV71, ATV71Q, ATV320, ATV LIFT, ATV312, ATV32, ATV 312 SOLAR, ATV61Q. This console VW3A1101 Télémécanique is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€110.00

6SL3210-5FB10-1UA0 - Servo drive - SIEMENS

6SL3210-5FB10-1UA0

This SIEMENS servo drive has the reference 6SL3210-5FB10-1UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives Servo drive: 0.1kW, 1.2A, 1/3AC 200 ... 240V, 50 / 60Hz SIEMENS servo drive reconditioned and tested on a manufacturer's test bench (100% test).

€360.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

XPSMC16ZC - Safety Controller - TELEMECANIQUE

XPSMC16ZC

This TELEMECANIQUE brand safety controller with reference XPSMC16ZC belongs to the XPS-MC range. 24Vdc - 16 inputs - signal. 32 LEDs - CANopen This Télémécanique XPSMC16ZC module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,970.00

XPSMC16Z - Safety Controller - TELEMECANIQUE

XPSMC16Z

This TELEMECANIQUE brand safety controller with reference XPSMC16Z belongs to the XPS-MC range. 24Vcc - 16 entrées - signal. 30 DEL This Télémécanique XPSMC16Z module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€920.00

XPSMC16ZP - Safety Controller - TELEMECANIQUE

XPSMC16ZP

This TELEMECANIQUE brand safety controller with reference XPSMC16ZP belongs to the XPS-MC range. 24Vcc - 16 entrées - signal. 32 DEL This Télémécanique XPSMC16ZP module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

XPSMC32Z - Safety Controller - TELEMECANIQUE

XPSMC32Z

This TELEMECANIQUE brand safety controller with reference XPSMC32Z belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 46 DEL This Télémécanique XPSMC32Z module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,545.00

XPSMC32ZC - Safety Controller - TELEMECANIQUE

XPSMC32ZC

This TELEMECANIQUE brand safety controller with reference XPSMC32ZC belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 48 DEL - CANOPEN This Télémécanique XPSMC32ZC module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,900.00

XPSMC32ZP - Safety Controller - TELEMECANIQUE

XPSMC32ZP

This TELEMECANIQUE brand safety controller with reference XPSMC32ZP belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 48 DEL This Télémécanique XPSMC32ZP module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,318.00

DST1405P - Variable speed drive - CONTROL TECHNIQUES

DST1405P

This servo motor reference DST1405P and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,940.00

VW3A1111 - Terminal - SCHNEIDER ELECTRIC

VW3A1111

This VW3A1111 console and SCHNEIDER ELECTRIC brand is a terminal from the ALTIVAR range. Altivar Machine ATV340 Altivar Process ATV900 Altivar Process ATV600 This SCHNEIDER ELECTRIC console is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

6SL3210-5FE12-0UF0 - Servo drive - SIEMENS

6SL3210-5FE12-0UF0

This SIEMENS servo drive bears the reference 6SL3210-5FE12-0UF0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90, with PROFINET Input voltage: 380-480 V 3 A - 15%/+10% 9.8 A 45 to 66 Hz Output voltage: 0 – Input voltage: 7.8 A 0-330 Hz Motor: 2.0/2.5 kW Protection rating: IP20 Size B, 100 x 180 x 220 (W x H x D) SIEMENS...

€610.00

6SL3210-5FE10-4UA0 - Servo drive - SIEMENS

6SL3210-5FE10-4UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE10-4UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A -15%/+10% 1.5 A 45 to 66 Hz Output voltage: 0 – Input voltage: 1.2 A 0-330 Hz Motor: 0 .4 kW Protection rating: IP20 Size AA 60 x 180 x 200 (L x H x D) SIEMENS servo drive...

€540.00

6SL3210-5FE10-8UA0 - Servo drive - SIEMENS

6SL3210-5FE10-8UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE10-8UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A - 15%/+10% 2.6 A 45 to 66 Hz Output voltage: 0 – Input voltage: 2.1 A 0-330 Hz Motor: 0 .75 kW Protection rating: IP20 Size A, 80 x 180 x 200 (W x H x D) SIEMENS servo drive...

€370.00

6SL3210-5FE11-0UA0 - Servo drive - SIEMENS

6SL3210-5FE11-0UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE11-0UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A - 15%/+10% 3.8 A 45 to 66 Hz Output voltage: 0 – Input voltage: 3.0 A 0-330 Hz Motor: 0 .75/1.0 kW Protection rating: IP20 Size A, 80 x 180 x 200 (W x H x D) SIEMENS servo drive...

€580.00

6SL3210-5FE11-5UA0 - Servo drive - SIEMENS

6SL3210-5FE11-5UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE11-5UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A - 15%/+10% 6.6 A 45 to 66 Hz Output voltage: 0 – Input voltage: 5.3 A 0-330 Hz Motor: 1 .5/1.75 kW Protection rating: IP20 Size B, 100 x 180 x 220 (W x H x D) SIEMENS servo drive...

€690.00

6SL3210-5FE13-5UA0 - Servo drive - SIEMENS

6SL3210-5FE13-5UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE13-5UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A - 15%/+10% 6.6 A 45 to 66 Hz Output voltage: 0 – Input voltage: 5.3 A 0-330 Hz Motor: 1 .5/1.75 kW Protection rating: IP20 Size B, 100 x 180 x 220 (W x H x D) SIEMENS servo drive...

€1,820.00

6SL3210-5FE15-0UA0 - Servo drive - SIEMENS

6SL3210-5FE15-0UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE15-0UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A - 15%/+10% 15.8 A 45 to 66 Hz Output voltage: 0 – Input voltage: 12.6 A 0-330 Hz Motor: 5 .0 kW Protection rating: IP20 Size C, 140 x 260 x 240 (W x H x D) SIEMENS servo drive...

€1,450.00

6SL3210-5FE17-0UA0 - Servo drive - SIEMENS

6SL3210-5FE17-0UA0

This SIEMENS servo drive bears the reference 6SL3210-5FE17-0UA0. It corresponds to the range of SIEMENS - SINAMICS V90 servo drives. SINAMICS V90 Input voltage: 380-480 V 3 A -15%/+10% 16.5 A 45 to 66 Hz Output voltage: 0 – Input voltage: 13.2 A 0-330 Hz Motor: 7 .0 kW Protection rating: IP20 Size C, 140 x 260 x 240 (W x H x D) SIEMENS servo drive...

€3,000.00