Catalog

Showing 1-36 of 67 item(s)

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

FX1N-24MR-ES/UL - PLC Module - MITSUBISHI

FX1N-24MR-ES/UL

MITSUBISHI PLC reference FX1N-24MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 14, 24V / 10 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

SBSC1110-1 - Servo Controller - BALDOR

SBSC1110-1

This SBSC1110-1 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input : 1AC120V 50/60Hz, 1PH, Output : 10A/ACO-320V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

DST1405P - Variable speed drive - CONTROL TECHNIQUES

DST1405P

This servo motor reference DST1405P and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,940.00

FN-XY16SC41 - I/O Module - PROFACE

FN-XY16SC41

This reference I/O module FN-XY16SC41 and PROFACE brand is part of the SP5000 range. 16 discrete points, 16 point input, transistor output This reconditioned and tested PROFACE automaton is at your disposal to replace your defective equipment and has a guarantee.

€385.00

FX1N-14MR-ES/UL - PLC Module - MITSUBISHI

FX1N-14MR-ES/UL

MITSUBISHI PLC reference FX1N-14MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 8, 24V / 6 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€190.00

FX1N-14MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-14MT-ESS/UL

MITSUBISHI PLC reference FX1N-14MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 8, 24V / 8 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€980.00

FX1N-24MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-24MT-ESS/UL

MITSUBISHI PLC reference FX1N-24MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 16, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€190.00

FX1N-40MR-ES/UL - PLC Module - MITSUBISHI

FX1N-40MR-ES/UL

MITSUBISHI PLC reference FX1N-40MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€270.00

FX1N-40MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-40MT-ESS/UL

MITSUBISHI PLC reference FX1N-40MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

FX1N-60MR-ES/UL - PLC Module - MITSUBISHI

FX1N-60MR-ES/UL

MITSUBISHI PLC reference FX1N-60MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 36, 24V / 24 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€250.00

FX1N-60MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-60MT-ESS/UL

MITSUBISHI PLC reference FX1N-60MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 40, 24V / 24 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€2,100.00

FX1N-14MR-DS - PLC Module - MITSUBISHI

FX1N-14MR-DS

MITSUBISHI PLC reference FX1N-14MR-DS. MELSEC-FX series. Inputs/Outputs: 8, 24V / 6 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€900.00

FX1N-14MT-DSS - PLC Module - MITSUBISHI

FX1N-14MT-DSS

MITSUBISHI PLC reference FX1N-14MT-DSS. MELSEC-FX series. Inputs/Outputs: 8, 24V / 8 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€310.00

FX1N-24MR-DS - PLC Module - MITSUBISHI

FX1N-24MR-DS

MITSUBISHI PLC reference FX1N-24MR-DS. MELSEC-FX series. Inputs/Outputs: 14, 24V / 10 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

FX1N-24MT-DSS - PLC Module - MITSUBISHI

FX1N-24MT-DSS

MITSUBISHI PLC reference FX1N-24MT-DSS. MELSEC-FX series. Inputs/Outputs: 16, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€600.00

FX1N-40MR-DS - PLC Module - MITSUBISHI

FX1N-40MR-DS

MITSUBISHI PLC reference FX1N-40MR-DS. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€440.00

FX1N-40MT-DSS - PLC Module - MITSUBISHI

FX1N-40MT-DSS

MITSUBISHI PLC reference FX1N-40MT-DSS. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€420.00

FX1N-60MR-DS - PLC Module - MITSUBISHI

FX1N-60MR-DS

MITSUBISHI PLC reference FX1N-60MR-DS. MELSEC-FX series. Inputs/Outputs: 36, 24V / 24 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,260.00

FX1N-60MT-DSS - PLC Module - MITSUBISHI

FX1N-60MT-DSS

MITSUBISHI PLC reference FX1N-60MT-DSS. MELSEC-FX series. Inputs/Outputs: 40, 24V / 24 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€420.00

FX0N-40ER-ES/UL - Extension - MITSUBISHI

FX0N-40ER-ES/UL

Extension for MITSUBISHI PLC reference FX0N-40ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€360.00

FX0N-40ET-DSS - Extension - MITSUBISHI

FX0N-40ET-DSS

Extension for MITSUBISHI PLC reference FX0N-40ET-DSS. MELSEC-FX series. Power supply 24VDC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€730.00

FX0N-40ER-DS - Extension - MITSUBISHI

FX0N-40ER-DS

Extension for MITSUBISHI PLC reference FX0N-40ER-DS. MELSEC-FX series. Power supply 24VDC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€250.00

FX2N-32ET-ESS/UL - Extension - MITSUBISHI

FX2N-32ET-ESS/UL

Extension for MITSUBISHI PLC reference FX2N-32ET-ESS/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 16/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€390.00

FX2N-32ER-ES/UL - Extension - MITSUBISHI

FX2N-32ER-ES/UL

Extension for MITSUBISHI PLC reference FX2N-32ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 16/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€560.00

FX2N-48ER-ES/UL - Extension - MITSUBISHI

FX2N-48ER-ES/UL

Extension for MITSUBISHI PLC reference FX2N-48ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 24/24. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€240.00