Catalog

Showing 1-36 of 64 item(s)

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

6AV6641-0BA11-0AX0 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX0

OP SIEMENS reference 6AV6641-0BA11-0AX0 for Simatic HMI. SIMATIC OPERATOR PANEL OP77A BACKLIT LC DISPLAY, 4.5 "DISPLAY W. GRAPHICS CAPABIL MPI- / PROFIBUS-DP INTERFACE UP TO 1,5MB, FOR WINCC CONFIGURATION FLEXIBLE 2004 COMPACT HSP UPWARDS. This OP 6AV6641-0BA11-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to...

€380.00

FX1N-24MR-ES/UL - PLC Module - MITSUBISHI

FX1N-24MR-ES/UL

MITSUBISHI PLC reference FX1N-24MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 14, 24V / 10 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

6AV6641-0BA11-0AX1 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX1

OP SIEMENS reference 6AV6641-0BA11-0AX1 for Simatic HMI. SIMATIC OP 77A operator panel backlit LC display, 4.5 '' graphic display, MPI- / PROFIBUS-DP interface up to 1.5MB, configurable from WinCC flexible 2004 Compact HSP This OP 6AV6641-0BA11-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

3UACG50150 - Servo drive - NUM

3UACG50150

This spindle drive reference 3UACG50150 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 70A, Max current: 106A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€4,450.00

3UACM5030 - Servo drive - NUM

3UACM5030

This spindle drive reference 3UACM5030 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 14A, Max current: 21A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,705.00

3UACL5050 - Servo drive - NUM

3UACL5050

This spindle drive reference 3UACL5050 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 24A, Max current: 35A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,650.00

3UACL5075 - Servo drive - NUM

3UACL5075

This spindle drive reference 3UACL5075 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 35A, Max current: 53A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,900.00

3UACG50100 - Servo drive - NUM

3UACG50100

This spindle drive reference 3UACG50100 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 47A, Max current: 70A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,250.00

3UACX50200 - Servo drive - NUM

3UACX50200

This spindle drive reference 3UACX50200 and brand NUM is a drive from the SERVOMAC UAC range. Nominal current: 94A, Max current: 141A, Auxiliary voltage: 24V This NUM drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,870.00

6AV2125-2AE13-0AX0 - Panel box - SIEMENS

6AV2125-2AE13-0AX0

SIEMENS panel box reference 6AV2125-2AE13-0AX0 SIMATIC HMI series. SIMATIC HMI connection box Standard SIMATIC HMI junction box standard for Mobile Panels, wall mounting, PROFINET and PROFIsafe, connection of safety relays, connection point detection integrated switch This SIEMENS HMI is at your disposal to replace your defective equipment and has a...

€1,490.00

FX1N-14MR-ES/UL - PLC Module - MITSUBISHI

FX1N-14MR-ES/UL

MITSUBISHI PLC reference FX1N-14MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 8, 24V / 6 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€190.00

FX1N-14MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-14MT-ESS/UL

MITSUBISHI PLC reference FX1N-14MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 8, 24V / 8 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€980.00

FX1N-24MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-24MT-ESS/UL

MITSUBISHI PLC reference FX1N-24MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 16, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€190.00

FX1N-40MR-ES/UL - PLC Module - MITSUBISHI

FX1N-40MR-ES/UL

MITSUBISHI PLC reference FX1N-40MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€270.00

FX1N-40MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-40MT-ESS/UL

MITSUBISHI PLC reference FX1N-40MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

FX1N-60MR-ES/UL - PLC Module - MITSUBISHI

FX1N-60MR-ES/UL

MITSUBISHI PLC reference FX1N-60MR-ES/UL. MELSEC-FX series. Inputs/Outputs: 36, 24V / 24 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€250.00

FX1N-60MT-ESS/UL - PLC Module - MITSUBISHI

FX1N-60MT-ESS/UL

MITSUBISHI PLC reference FX1N-60MT-ESS/UL. MELSEC-FX series. Inputs/Outputs: 40, 24V / 24 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€2,100.00

FX1N-14MR-DS - PLC Module - MITSUBISHI

FX1N-14MR-DS

MITSUBISHI PLC reference FX1N-14MR-DS. MELSEC-FX series. Inputs/Outputs: 8, 24V / 6 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€900.00

FX1N-14MT-DSS - PLC Module - MITSUBISHI

FX1N-14MT-DSS

MITSUBISHI PLC reference FX1N-14MT-DSS. MELSEC-FX series. Inputs/Outputs: 8, 24V / 8 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€310.00

FX1N-24MR-DS - PLC Module - MITSUBISHI

FX1N-24MR-DS

MITSUBISHI PLC reference FX1N-24MR-DS. MELSEC-FX series. Inputs/Outputs: 14, 24V / 10 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€700.00

FX1N-24MT-DSS - PLC Module - MITSUBISHI

FX1N-24MT-DSS

MITSUBISHI PLC reference FX1N-24MT-DSS. MELSEC-FX series. Inputs/Outputs: 16, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€600.00

FX1N-40MR-DS - PLC Module - MITSUBISHI

FX1N-40MR-DS

MITSUBISHI PLC reference FX1N-40MR-DS. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€440.00

FX1N-40MT-DSS - PLC Module - MITSUBISHI

FX1N-40MT-DSS

MITSUBISHI PLC reference FX1N-40MT-DSS. MELSEC-FX series. Inputs/Outputs: 24, 24V / 16 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€420.00

FX1N-60MR-DS - PLC Module - MITSUBISHI

FX1N-60MR-DS

MITSUBISHI PLC reference FX1N-60MR-DS. MELSEC-FX series. Inputs/Outputs: 36, 24V / 24 relays. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€1,260.00

FX1N-60MT-DSS - PLC Module - MITSUBISHI

FX1N-60MT-DSS

MITSUBISHI PLC reference FX1N-60MT-DSS. MELSEC-FX series. Inputs/Outputs: 40, 24V / 24 transistors. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€420.00

FX0N-40ER-ES/UL - Extension - MITSUBISHI

FX0N-40ER-ES/UL

Extension for MITSUBISHI PLC reference FX0N-40ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€360.00

FX0N-40ET-DSS - Extension - MITSUBISHI

FX0N-40ET-DSS

Extension for MITSUBISHI PLC reference FX0N-40ET-DSS. MELSEC-FX series. Power supply 24VDC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€730.00

FX0N-40ER-DS - Extension - MITSUBISHI

FX0N-40ER-DS

Extension for MITSUBISHI PLC reference FX0N-40ER-DS. MELSEC-FX series. Power supply 24VDC, Inputs/Outputs: 24/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€250.00

FX2N-32ET-ESS/UL - Extension - MITSUBISHI

FX2N-32ET-ESS/UL

Extension for MITSUBISHI PLC reference FX2N-32ET-ESS/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 16/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€390.00

FX2N-32ER-ES/UL - Extension - MITSUBISHI

FX2N-32ER-ES/UL

Extension for MITSUBISHI PLC reference FX2N-32ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 16/16. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€560.00

FX2N-48ER-ES/UL - Extension - MITSUBISHI

FX2N-48ER-ES/UL

Extension for MITSUBISHI PLC reference FX2N-48ER-ES/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 24/24. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€240.00

FX2N-48ET-ESS/UL - Extension - MITSUBISHI

FX2N-48ET-ESS/UL

Extension for MITSUBISHI PLC reference FX2N-48ET-ESS/UL. MELSEC-FX series. Power supply 100-240VAC, Inputs/Outputs: 24/24. This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€280.00

FX0N-8EX-ES/UL - Extension - MITSUBISHI

FX0N-8EX-ES/UL

Extension for MITSUBISHI PLC reference FX0N-8EX-ES/UL. MELSEC-FX series. 24VDC, Inputs/Outputs: 8/0 This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€100.00

FX2N-8EX-ES/UL - Extension - MITSUBISHI

FX2N-8EX-ES/UL

Extension for MITSUBISHI PLC reference FX2N-8EX-ES/UL. MELSEC-FX series. 24VDC, Inputs/Outputs: 8/0 This MITSUBISHI automaton is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. PLC tested on MITSUBISHI PLC bench.

€85.00