Catalog

A06B-6055-H322 - Drive - FANUC

A06B-6055-H322

This FANUC 6055 Series and A06B-6055-H322 spindle drive is designed to control FANUC 50P motors. This 3-axis variator is complete, internal radiation type, 4500 rpm This A06B-6055-H322 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,980.00

A06B-6055-H106 - AC Spindle Servo Drive - FANUC

A06B-6055-H106

This FANUC 6055 series and reference A06B-6055-H106 is a 1-axis spindle drive. It is equipped with a FANUC A20B-1001-0120 control board.This A06B-6055-H106 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€2,190.00

On sale!

TLC634 NF - Twin Line Controller - BERGER LAHR

TLC634 NF

This BERGER LAHR drive, reference TLC634 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 3A, 1.5kW, 230/480 Volts, 3 phases. This TLC634 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€500.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

TLC638 NF - Twin Line Controller - BERGER LAHR

TLC638 NF

This BERGER LAHR drive, reference TLC638 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 16A, 8kW, 230/480 Volts, 3 phases. This TLC638 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€840.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00