Catalog

A06B-6050-H103 - Velocity Control Unit - FANUC

A06B-6050-H103

This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€600.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

PCD4-E110 - Inputs module - SAIA

PCD4-E110

This SAIA input module is reference PCD4-E110. It is part of the PCD4 range. 24 Volts, 8mA / Positive or negative logic. 16 entries. This SAIA all-or-nothing (TOR) input module is available to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (100% test).

€240.00

315-2AG23 - 315SB - CPU - VIPA

315-2AG23 - 315SB

This reference CPU 315-2AG23 - 315SB and VIPA brand is integrated into the 300S+ range. Standard CPU: memory: 4096kB, software: SPEED7, SIMATIC, TIA This VIPA CPU is at your disposal to replace your defective and adapted hardware.

€2,800.00