Catalog

NT620C-ST141-E - Programmable Terminal - OMRON

NT620C-ST141-E

This reference terminal NT620C-ST141-E and brand OMRON is an interactive display panel. Series NT620S/620C. Terminal STN color LCD type (with backlight). 640 x 480 dots.32 x 24 switches. This OMRON terminal is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€1,310.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

LMC20 - Lexium Controller - TELEMECANIQUE

LMC20

This TELEMECANIQUE motion controller is reference LMC20. It is part of the LEXIUM range. Allows to connect: a graphic terminal, a Magelis HMI terminal, a PLC ... This TELEMECANIQUE motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,695.00

R88D-1SN08H-ECT - Servo Drive - OMRON

R88D-1SN08H-ECT

This OMRON servo drive is reference R88D-1SN08H-ECT. It matches the 1S Sysmac servo drive range. Servo drive : Input: 230V single phase, 50/60Hz, Output: 7.3A, 750W. Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€360.00

R88M-1M75030T-S2 - Servo motor - OMRON

R88M-1M75030T-S2

This OMRON R88M-1M75030T-S2 servo motor is a SYSMAC 1S series motor. Characteristics: 230V, 750W, 4.6A for R88D-1SN08H-ECT. servo drive. This R88M-1M75030T-S2 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00