Catalog

A20B-1000-0852 - Graphic Board - FANUC

A20B-1000-0852

This FANUC brand graphic board A020B-1000-0852 for sale in exchange or standard. Video card A020B-1000-0852 reconditioned and tested under full load (duration test) on Fanuc 10 and 11 bench. This A020B-1000-0852 video card comes with a warranty.

€530.00

650/007/400/0/00/DISP/FR/0/0 - AC Inverter - EUROTHERM

650/007/400/0/00/DISP/FR/0/0

This EUROTHERM drive, reference 650/007/400/0/00/DISP/FR/0/0 is an AC drive. It belongs to the SSD Drive 650 series. EUROTHERM AC controller of 0,75 kW, 2,5 A. 380-460 Vac - 50 Hz. 3 phases This 650/007/400/0/00/DISP/FR/0/0 Inverter is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€430.00

650/015/400/0/00/DISP/FR/0/0 - AC Inverter - EUROTHERM

650/015/400/0/00/DISP/FR/0/0

This EUROTHERM drive, reference 650/015/400/0/00/DISP/FR/0/0 is an AC drive. It is part of the SSD Drive 650 series. EUROTHERM AC drive of 1.5 kW, 4.5 A. 380-460 Vac - 50 Hz. 3 phases This 650/015/400/0/00/DISP/FR/0/0 Inverter is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€370.00

On sale!

TLC634 NF - Twin Line Controller - BERGER LAHR

TLC634 NF

This BERGER LAHR drive, reference TLC634 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 3A, 1.5kW, 230/480 Volts, 3 phases. This TLC634 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€500.00

TLC638 NF - Twin Line Controller - BERGER LAHR

TLC638 NF

This BERGER LAHR drive, reference TLC638 NF is a drive for synchronous ac servomotors. It belongs to the TWIN LINE range. IP20 controller without integrated current filter. 16A, 8kW, 230/480 Volts, 3 phases. This TLC638 NF drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€840.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00