Catalog

MTS-140-08/16-247/T - Servo Drive - AXOR

MTS-140-08/16-247/T

This AXOR servo drive, reference MTS-140-08/16-247/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-247/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€450.00

MTS-140-08/16-RX-S-0247/TO-RD - Servo Drive - AXOR

MTS-140-08/16-RX-S-0247/TO-RD

This AXOR servo drive, reference MTS-140-08/16-RX-S-0247/TO-RD is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-RX-S-0247/TO-RD is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€485.00

MTS-140-20/40-248/T - Servo Drive - AXOR

MTS-140-20/40-248/T

This AXOR servo drive, reference MTS-140-20/40-248/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 20A 250V - 95 Vac. 3 phases This servo drive MTS-140-20/40-248/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€790.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

DIGIFAS 7201 - Servo amplifier - KOLLMORGEN

DIGIFAS 7201

This reference servo amplifier DIGIFAS 7201 and brand KOLLMORGEN is a servodrive of the range DIGIFAS 7200. DIGIFAS 7201: 3x400V, 0.9kVA, 1.5A, 3.2kW, 50/60Hz. IP20 This KOLLMORGEN servo amplifier is at your disposal to replace your defective equipment and has a suitable guarantee.

€780.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00