Catalog

A06B-6050-H103 - Velocity Control Unit - FANUC

A06B-6050-H103

This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€600.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

On sale!

CLV621-0120 - Barcode reader - SICK

CLV621-0120

This barcode reader from the CLV62X range and reference CLV621-0120 has a reading range of 60 to 730mm. 10V...30V, Ethernet connection This SICK brand CLV621-0120 reader is at your disposal to replace your defective equipment.

€1,950.00