Catalog

ATV11HU18M2E - Speed Drive - TELEMECANIQUE

ATV11HU18M2E

This reference variator ATV11HU18M2E and brand SCHNEIDER TELEMECANIQUE is a variable speed drive for asynchronous motors. Inverter of 0.75kW, 3/4HP, 200/240 V, 50/60 Hz. This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€530.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

7EX270.50-1 - CAN BUS Controller - B&R

7EX270.50-1

This CAN BUS B&R controller is reference 7EX270.50-1. It belongs to the B&R SYSTEM 2003 series. 2003 CAN bus controller, 24 VDC, 4 W power supply, 1 CAN interface,electrically isolated, network capable This CAN BUS B&R controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€440.00

7DM435.7 - Digital mixed module - B&R

7DM435.7

This B&R digital mixed module is reference 7DM435.7. It belongs to the B & R SYSTEM 2003 series. Digital mixed module, 16 inputs 24 VDC, 1 ms, Sink, 16 outputs transistors 24 VDC, 0.5 A. This B&R digital mixed module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€110.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00