Catalog

ATV58HD12N4 - Speed Drive - TELEMECANIQUE

ATV58HD12N4

This reference controller ATV58HD12N4 and brand SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR58 series.Speed drive : 7.5Kw, 17,6A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D.This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,070.00

On sale!

ATV58HD33N4 - Speed drive - TELEMECANIQUE

ATV58HD33N4

This reference speed drive ATV58HD33N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 22kW, 48.4A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,700.00

ATV58HU41N4 - Speed drive - TELEMECANIQUE

ATV58HU41N4

This reference speed drive ATV58HU41N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Dimmer: 2.2kW, 5.8A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€815.00

ATV58HU18M2 - Speed drive - TELEMECANIQUE

ATV58HU18M2

This ATV58HU18M2 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 0.75kW, 4.1A, 1PH, 50 / 60Hz, 200 / 240V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€360.00

VW3A58101 - Keypad - TELEMECANIQUE

VW3A58101

This console VW3A58101 and brand TELEMECANIQUE is a programming console of the range ALTIVAR58. Used for ATV58 ... N4 and ATV58 ... M2. This console VW3A58101 Télémécanique is at your disposal to replace your defective material and has a guarantee adapted to your needs.

€115.00

UD75 - CTNet Interface Card - LEROY SOMER

UD75

This LEROY SOMER UD75 reference interface board is part of the UNIDRIVE range. May be marketed under the brand name CONTROL TECHNIQUES or EMERSON. This interface card LEROY SOMER UD75 is available to you in standard supply or exchange to replace your defective equipment and has a warranty.

€980.00

UD52 - SIN-COS Option Module - CONTROL TECHNIQUES

UD52

This UD52 CONTROL TECHNIQUES option module is a SIN-COS encoding interface for the UNIDRIVE range. The UD52 operates with encoders having 256, 512, 1024, 2048 or 4096 lines per revolution and has an operating frequency of 102.4 kHz. This option module is at your disposal in standard supply or exchange to replace your defective equipment and has a warranty.

€920.00

ATV58HD46N4 - Speed drive - TELEMECANIQUE

ATV58HD46N4

This ATV58HD46N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed Controller : 30kW, 40HP, 66A, 3PH, 50/60Hz, 380/500V, SQUARE D. This ALTIVAR58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€5,460.00

ATV58HU54M2 - Speed drive - TELEMECANIQUE

ATV58HU54M2

This ATV58HU54M2 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for asynchronous motors. ALTIVAR 58 Series Speed Drive: 3 kW, 13,7A, 3PH, 50/60Hz, 200/240V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,220.00

UNI 2402 - Synchron Controller - CONTROL TECHNIQUES

UNI 2402

This reference CONTROL TECHNIQUES speed controller UNI 2402 is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UNI 2402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,470.00

UD78 - Servo option module - CONTROL TECHNIQUES

UD78

This servo option module CONTROL TECHNIQUES reference UD78 is an interface for the UNIDRIVE range. The UD78 can only be used with disks equipped with version 3 (or later) software. (The 0.50 parameter indicates the software version.) This option module CONTROL TECHNIQUES is at your disposal in supply to replace your defective equipment and has a guarantee.

€1,820.00

UD53 - Resolver interface option module - CONTROL TECHNIQUES

UD53

This UD53 CONTROL TECHNIQUES option module is a resolver module interface for the UNIDRIVE range. The optional small module UD53 Resolver is an interface module to be installed in a Unidrive. This option module UD53 is available to you in standard supply or exchange to replace your defective equipment and has a warranty

€1,120.00