Catalog

Showing 1-36 of 257 item(s)

A06B-0162-B175 - Servo Motor - FANUC

A06B-0162-B175

This Servo Motor A06B-0162-B175 and brand FANUC is a motor of the range Alpha, Model: aM6 / 3000Output: 1.4kW, 6.0A, Frequency: 200Hz, 3000 RPMThis servo motor A06B-0162-B175 FANUC is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,110.00

A06B-0128-B675 - Servo Motor - FANUC

A06B-0128-B675

This servo motor A06B-0128-B675 and brand FANUC is a motor of the range Alpha, Model: a6 / 3000 Output: 1.4kW, 7.5A, Frequency: 200Hz, 3000 RPM. This A06B-0128-B675 FANUC motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

A06B-0147-B177 - Servo Motor - FANUC

A06B-0147-B177

This servo motor A06B-0147-B177 and brand FANUC is a motor of the range Alpha, Model: a22/2000 Output: 3,8kW, 15A, Frequency: 133Hz, 2000 RPM. This A06B-0147-B177 FANUC motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,940.00

A06B-6096-H301 - Servo Amplifier Module - FANUC

A06B-6096-H301

This servo amplifier module A06B-6096-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series. Input: 283-325V, 1.85kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 3A. With FSSB interface. This A06B-6096-H301servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.Servo...

€2,000.00

A06B-6096-H302 - Servo Amplifier Module - FANUC

A06B-6096-H302

This servo amplifier module A06B-6096-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series. Input: 283-325V, 2.45kW. - Nominal output 230V ~ L axis : 3A, M axis : 3A, N axis : 5.9A. With FSSB interface. This A06B-6096-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€2,600.00

A06B-6096-H303 - Servo Amplifier Module - FANUC

A06B-6096-H303

This servo amplifier module A06B-6096-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.10kW. - Nominal output 230V ~ L axis : 3A, M axis : 5.9A, N axis : 5.9A. With FSSB interface. This A06B-6096-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,200.00

A06B-6096-H304 - Servo Amplifier Module - FANUC

A06B-6096-H304

This servo amplifier module A06B-6096-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With FSSB interface. This A06B-6096-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,900.00

A06B-6096-H305 - Servo Amplifier Module - FANUC

A06B-6096-H305

This servo amplifier module A06B-6096-H305 and brand FANUC is a 3-axis AC drive. SVM3-12/12/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 12.5A. With FSSB interface. This A06B-6096-H305 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,550.00

A06B-6096-H306 - Servo Amplifier Module - FANUC

A06B-6096-H306

This servo amplifier module A06B-6096-H306 and brand FANUC is a 3-axis AC drive. SVM3-12/20/40 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H306 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,700.00

A06B-6096-H307 - Servo Amplifier Module - FANUC

A06B-6096-H307

This servo amplifier module A06B-6096-H307 and brand FANUC is a 3-axis AC drive. SVM3-20/20/40 series Input:283-325V, 4.35kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 12.5A. With FSSB interface. This A06B-6096-H307 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€3,340.00

A06B-6079-H301 - Servo Amplifier Module - FANUC

A06B-6079-H301

This servo amplifier module A06B-6079-H301 and brand FANUC is a 3-axis AC drive. SVM3-12/12/12 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 3A. With Type A interface. This A06B-6079-H301 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€1,890.00

A06B-6079-H302 - Servo Amplifier Module - FANUC

A06B-6079-H302

This servo amplifier module A06B-6079-H302 and brand FANUC is a 3-axis AC drive. SVM3-12/12/20 series Input:283-325V, 1.85kW. - Nominal output 230V ~ L axis: 3A, M axis: 3A, N axis: 5.9A. With Type A interface. This A06B-6079-H302 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,000.00

A06B-6079-H303 - Servo Amplifier Module - FANUC

A06B-6079-H303

This servo amplifier module A06B-6079-H303 and brand FANUC is a 3-axis AC drive. SVM3-12/20/20 series Input:283-325V, 3.1kW. - Nominal output 230V ~ L axis: 3A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H303 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your needsServo...

€2,050.00

A06B-6079-H304 - Servo Amplifier Module - FANUC

A06B-6079-H304

This servo amplifier module A06B-6079-H304 and brand FANUC is a 3-axis AC drive. SVM3-20/20/20 series Input:283-325V, 3.7kW. - Nominal output 230V ~ L axis: 5.9A, M axis: 5.9A, N axis: 5.9A. With Type A interface. This A06B-6079-H304 servo amplifier module is at your disposal to replace your defective hardware and has a warranty adapted to your...

€1,900.00

8V1090.00-2 - Servo drive - B&R

8V1090.00-2

This B&R servo drive has the reference 8V1090.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 8.8 A, 4 kW, network filter, integrated braking resistor and electronic blocking for secure restart. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€2,310.00

A06B-0162-B110 - Servo Motor - FANUC

A06B-0162-B110

This Servo Motor A06B-0162-B110 and brand FANUC is a motor of the range Alpha, Model: aM6 / 3000Output: 1.4kW, 6.0A, Frequency: 200Hz, 3000 RPMThis servo motor A06B-0162-B110 FANUC is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,140.00

A06B-0162-B075 - Servo Motor - FANUC

A06B-0162-B075

This Servo Motor A06B-0162-B075 and brand FANUC is a motor of the range Alpha, Model: aM6 / 3000Output: 1.4kW, 6.0A, Frequency: 200Hz, 3000 RPMThis servo motor A06B-0162-B075 FANUC is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,720.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

8V1320.00-2 - Servo drive - B&R

8V1320.00-2

This B&R servo drive has the reference 8V1320.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 34 A, 16 kW, ,line filter, braking resistor, DC bus power supply and electronic secure restart inhibit integrated. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€5,080.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

8V1022.00-2 - Servo drive - B&R

8V1022.00-2

This B&R servo drive has the reference 8V1022.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x 400-480 V, 4A, 3kVA. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€1,250.00

8V1045.00-2 - Servo drive - B&R

8V1045.00-2

This B&R servo drive has the reference 8V1045.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x 400-480 V, 7A, 5kVA. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€1,590.00

8V1180.00-2 - Servo drive - B&R

8V1180.00-2

This B&R servo drive has the reference 8V1180.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 19A, 17kVA. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€5,800.00

8V1640.00-2 - Servo drive - B&R

8V1640.00-2

This B&R servo drive has the reference 8V1640.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 26A, 54kVA. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€6,860.00

8V128M.00-2 - Servo drive - B&R

8V128M.00-2

This B&R servo drive has the reference 8V128M.00-2. It corresponds to the ACOPOS range of servo drives. ACOPOS servo drive, 3x400-480 V, 26A, 98kVA. B&R servo drive reconditioned and tested on manufacturer's test bench (100% test).

€18,200.00

8AC110.60-2 - Plug-in module - B&R

8AC110.60-2

This B&R plug-in module is part number 8AC110.60-2. It corresponds to the ACOPOS range for servo drives of the same range. CAN interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€155.00

8AC112.60-1 - Plug-in module - B&R

8AC112.60-1

This B&R plug-in module is part number 8AC112.60-1. It corresponds to the ACOPOS range for servo drives of the same range. POWERLINK ethernet interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€225.00

8AC120.60-1 - Plug-in module - B&R

8AC120.60-1

This B&R plug-in module is part number 8AC120.60-1. It corresponds to the ACOPOS range for servo drives of the same range. EnDat 2.1 encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€125.00

8AC122.60-2 - Plug-in module - B&R

8AC122.60-2

This B&R plug-in module is part number 8AC122.60-2. It corresponds to the ACOPOS range for servo drives of the same range. Encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€130.00

8AC140.61-3 - Plug-in module - B&R

8AC140.61-3

This B&R plug-in module is part number 8AC140.61-3. It corresponds to the ACOPOS range for servo drives of the same range. CPU interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€474.00

8AC123.60-1 - Plug-in module - B&R

8AC123.60-1

This B&R plug-in module is part number 8AC123.60-1. It corresponds to the ACOPOS range for servo drives of the same range. Incremental encoder and SSI absolute encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€465.00

8AC130.60-1 - Plug-in module - B&R

8AC130.60-1

This B&R plug-in module is part number 8AC130.60-3. It corresponds to the ACOPOS range for servo drives of the same range. Digital mixed module for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).

€220.00