Catalog

ATV71H075M3Z - Speed Drive - TELEMECANIQUE

ATV71H075M3Z

This ATV71H075M3Z and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71H075M3Z : 0.37kW-1PH, 200-240V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€360.00

ATV71H075N4 - Speed Drive - TELEMECANIQUE

ATV71H075N4

This ATV71H075N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71H075N4 : 0.75kW - 1PH, 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€490.00

ATV71HU15N4 - Speed Drive - TELEMECANIQUE

ATV71HU15N4

This ATV71HU15N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71HU15N4: 1,5kW - 3PH, 380 / 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€675.00

ATV71HU55N4 - Speed Drive - TELEMECANIQUE

ATV71HU55N4

This ATV71HU55N4 and SCHNEIDER / TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71HU55N4 : 5.5kW - 7.5HP, 3PH, 380 / 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€890.00

UD75 - CTNet Interface Card - LEROY SOMER

UD75

This LEROY SOMER UD75 reference interface board is part of the UNIDRIVE range. May be marketed under the brand name CONTROL TECHNIQUES or EMERSON. This interface card LEROY SOMER UD75 is available to you in standard supply or exchange to replace your defective equipment and has a warranty.

€980.00

UD52 - SIN-COS Option Module - CONTROL TECHNIQUES

UD52

This UD52 CONTROL TECHNIQUES option module is a SIN-COS encoding interface for the UNIDRIVE range. The UD52 operates with encoders having 256, 512, 1024, 2048 or 4096 lines per revolution and has an operating frequency of 102.4 kHz. This option module is at your disposal in standard supply or exchange to replace your defective equipment and has a warranty.

€920.00

ATV71HD18N4 - Speed Drive - TELEMECANIQUE

ATV71HD18N4

This ATV71HD18N4 and SCHNEIDER / TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71HD18N4: 18.5kW - 25HP, 3PH, 380 / 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,010.00

UNI 2402 - Synchron Controller - CONTROL TECHNIQUES

UNI 2402

This reference CONTROL TECHNIQUES speed controller UNI 2402 is a drive for asynchronous and synchronous motor. Inverter 7,5 kW, 16 A, 380-480V This UNI 2402 speed controller is at your disposal to replace defective equipment and has a guarantee adapted to your needs. Speed controller reconditioned and tested in full load (test of duration) on CONTROL...

€1,470.00

ATV71HU40N4 - Speed Drive - TELEMECANIQUE

ATV71HU40N4

This ATV71HU40N4 and SCHNEIDER/TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71HU40N4 : 4 kW - 5HP, 3PH, 380 / 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€890.00

ATV71HD22N4 - Speed Drive - TELEMECANIQUE

ATV71HD22N4

This ATV71HD22N4 and SCHNEIDER / TELEMECANIQUE reference speed controller is a variable speed drive for synchronous and asynchronous motors. ATV71HD22N4: 22 kW - 30HP, 3PH, 380 / 480V, EMC filter - Terminal This ALTIVAR71 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,520.00

UD78 - Servo option module - CONTROL TECHNIQUES

UD78

This servo option module CONTROL TECHNIQUES reference UD78 is an interface for the UNIDRIVE range. The UD78 can only be used with disks equipped with version 3 (or later) software. (The 0.50 parameter indicates the software version.) This option module CONTROL TECHNIQUES is at your disposal in supply to replace your defective equipment and has a guarantee.

€1,820.00

UD53 - Resolver interface option module - CONTROL TECHNIQUES

UD53

This UD53 CONTROL TECHNIQUES option module is a resolver module interface for the UNIDRIVE range. The optional small module UD53 Resolver is an interface module to be installed in a Unidrive. This option module UD53 is available to you in standard supply or exchange to replace your defective equipment and has a warranty

€1,120.00