Catalog

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

PMC-6270 - Motion controller - PARKER

PMC-6270

This PMC-6270 reference and PARKER brand motion controller is a 6000 series drive. PMC-6270 servo motion controller: 120/240VAC, 2 axes This PARKER motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€740.00

R88D-1SN08H-ECT - Servo Drive - OMRON

R88D-1SN08H-ECT

This OMRON servo drive is reference R88D-1SN08H-ECT. It matches the 1S Sysmac servo drive range. Servo drive : Input: 230V single phase, 50/60Hz, Output: 7.3A, 750W. Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€360.00

R88M-1M75030T-S2 - Servo motor - OMRON

R88M-1M75030T-S2

This OMRON R88M-1M75030T-S2 servo motor is a SYSMAC 1S series motor. Characteristics: 230V, 750W, 4.6A for R88D-1SN08H-ECT. servo drive. This R88M-1M75030T-S2 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00