Catalog

Showing 37-72 of 486 item(s)

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

SBSC1115 - Servo Controller - BALDOR

SBSC1115

This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€720.00

A06B-0128-B675 - Servo Motor - FANUC

A06B-0128-B675

This servo motor A06B-0128-B675 and brand FANUC is a motor of the range Alpha, Model: a6 / 3000 Output: 1.4kW, 7.5A, Frequency: 200Hz, 3000 RPM. This A06B-0128-B675 FANUC motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

A06B-6080-H304 - Servo Amplifier Module - FANUC

A06B-6080-H304

This FANUC servo amplifier with 3 axes and reference A06B-6080-H304 is an AC drive. SVM3-20/20/20. Input: 283-325V, Output: 3.7 kW, Output 230v ~ 5.9A / 5.9 / 5.9, Type B This servo amplifier A06B-6080-H304 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo amplifier reconditioned and tested under full...

€1,960.00

A06B-6082-H206 - Spindle Amplifier Module - FANUC

A06B-6082-H206

This FANUC spindle drive, part number A06B-6082-H206#H512 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPMC-5.5 range. Spindle drive, Alpha C Fanuc series. 6.8kw, 230V, 27A. This drive A06B-6082-H206#H512 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,650.00

A06B-6077-H106 - Power Supply - FANUC

A06B-6077-H106

This power supply A06B-6077-H106 Alpha Fanuc is at your disposal. Fanuc PSM-5.5 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H106 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€1,185.00

A06B-6079-H101 - Servo Amplifier Module - FANUC

A06B-6079-H101

This FANUC Axis Drive A06B-6079-H101, FANUC Servo Amplifier Module Alpha SVM1-12 is designed for FANUC Alpha 22 motors. Fanuc Alpha SVM1-12 Servo amplifier. 1 axe. Type A/B interface Alpha Module. Input : >283-325V, 0,75kW,. Output: 3A This A06B-6079-H101 axis drive is at your disposal to replace your defective equipment and has a guarantee of...

€700.00

A06B-6079-H201 - Servo Amplifier Module - FANUC

A06B-6079-H201

This FANUC 2-axis and reference A06B-6079-H201 is available to replace your equipment. SVM2-12/12. Rated input : 283-325v / Power : 1.5 kW. - Rated Output 230v~ 3.0A/3.0A This A06B-6079-H201 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,160.00

A06B-6079-H202 - Servo Amplifier Module - FANUC

A06B-6079-H202

This FANUC 2-axis and reference A06B-6079-H202 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2 kW. - Rated Output 230v~ 3.0A/5.9A This A06B-6079-H202 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,030.00

A06B-6079-H203 - Servo Amplifier Module - FANUC

A06B-6079-H203

This FANUC 2-axis and reference A06B-6079-H203 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2,5 kW. - Rated Output 230v~ 5.9A/5.9A This A06B-6079-H203 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,180.00

A06B-6079-H204 - Servo Amplifier Module - FANUC

A06B-6079-H204

This FANUC 2-axis and reference A06B-6079-H204 is available to replace your equipment. SVM2-12/40. Rated input : 283-325v / Power : 3,4 kW. - Rated Output 230v~ 3.0A/12.5A This A06B-6079-H204 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,280.00

A06B-6079-H205 - Servo Amplifier Module - FANUC

A06B-6079-H205

This FANUC 2-axis and reference A06B-6079-H205 is available to replace your equipment. SVM2-20/40. Rated input : 283-325v / Power : 3,9 kW. - Rated Output 230v~ 5.9A/12.5A This A06B-6079-H205 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,300.00

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1102 - Servo Controller - BALDOR

SBSC1102

This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,170.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

A16B-2203-0764 - Process I/O HE - FANUC

A16B-2203-0764

This FANUC I/O process board is part number A16B-2203-0764. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€6,350.00

A16B-1211-0970 - I/O Board - FANUC

A16B-1211-0970

This FANUC I/O board is part number A16B-1211-0970. It is part of the FANUC Series 0-C. Features: E3 I/O 104/72 DI/DO for 0-MC, 0-TC, 0-MD, 0-TD. This FANUC board is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Board reconditioned and tested on bench manufacturer (Test 100%).

€620.00

A16B-3200-0042 - CPU Board - FANUC

A16B-3200-0042

This FANUC CPU board reference A16B-3200-0042 is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0042 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€670.00

A06B-6089-H105 - Servo Amplifier Module - FANUC

A06B-6089-H105

This FANUC amplifier module with 1 axis and reference A06B-6089-H105 is a drive type AC.SVU 1-80. Input: 200-230V / Power: 17A. - Nominal output 230V ~ 17A / 18.7A This amplifier module A06B-6089-H105 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load...

€695.00

On sale!

A06B-6089-H208 - Servo Amplifier Module - FANUC

A06B-6089-H208

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H208 is a drive type AC. SVU2-80/80. Input: 200-230V/Power: 13A. - Nominal output 230V ~ 10A/10A This servo amplifier A06B-6089-H208 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,210.00

A06B-6088-H222 - Spindle Amplifier Module - FANUC

A06B-6088-H222

This FANUC reference spindle drive A06B-6088-H222#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6088-H222#H500 is at your disposal to replace your defective equipment and has a guarantee...

€1,780.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

A06B-6102-H211 - Spindle Amplifier Module - FANUC

A06B-6102-H211

This FANUC reference spindle drive A06B-6102-H211#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-11-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 48A This spindle amplifier module A06B-6102-H211#H520 is at your disposal to replace your defective equipment and has a...

€1,460.00

A20B-2100-0770 - Operator Panel PC Board - FANUC

A20B-2100-0770

This FANUC reference board A20B-2100-0770 is used for FANUC R-j3iB robots. LED: communication status with the main boardON NormalOFF Communication errorPON: Illuminates normally when the internal power supply of the panel board produces + 5V. This FANUC control board is sold with a guarantee of operation.

€1,249.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

A05B-2301-C305 - Teach Pendant - FANUC

A05B-2301-C305

This Fanuc branded reference box A05B-2301-C305 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach is reconditioned and tested on FANUC robot.

€895.00