Catalog

Showing 37-72 of 511 item(s)

TS8003 - Operator touch screen - PARKER

TS8003

This PARKER reference TS8003 touch screen operator is part of the TS8000 series and the PARVEX SSD range. TS8003: 24V; 2 colors, 8 programmable keys, 5 navigation keys, 12 numeric keys and 7 dedicated keys This PARKER terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Device 100% tested.

€1,365.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

SBSC1115 - Servo Controller - BALDOR

SBSC1115

This SBSC1115 brushless reference and brand BALDOR is a drive for Brushless AC motor. SBSC 1000/1100 Series Input: 3AC 230V 50 / 60Hz, 3PH, Output: 15A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€720.00

A06B-0128-B675 - Servo Motor - FANUC

A06B-0128-B675

This servo motor A06B-0128-B675 and brand FANUC is a motor of the range Alpha, Model: a6 / 3000 Output: 1.4kW, 7.5A, Frequency: 200Hz, 3000 RPM. This A06B-0128-B675 FANUC motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

A06B-6080-H304 - Servo Amplifier Module - FANUC

A06B-6080-H304

This FANUC servo amplifier with 3 axes and reference A06B-6080-H304 is an AC drive. SVM3-20/20/20. Input: 283-325V, Output: 3.7 kW, Output 230v ~ 5.9A / 5.9 / 5.9, Type B This servo amplifier A06B-6080-H304 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo amplifier reconditioned and tested under full...

€1,960.00

A06B-6082-H206 - Spindle Amplifier Module - FANUC

A06B-6082-H206

This FANUC spindle drive, part number A06B-6082-H206#H512 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPMC-5.5 range. Spindle drive, Alpha C Fanuc series. 6.8kw, 230V, 27A. This drive A06B-6082-H206#H512 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,650.00

A06B-6077-H106 - Power Supply - FANUC

A06B-6077-H106

This power supply A06B-6077-H106 Alpha Fanuc is at your disposal. Fanuc PSM-5.5 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H106 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€1,185.00

A06B-6079-H101 - Servo Amplifier Module - FANUC

A06B-6079-H101

This FANUC Axis Drive A06B-6079-H101, FANUC Servo Amplifier Module Alpha SVM1-12 is designed for FANUC Alpha 22 motors. Fanuc Alpha SVM1-12 Servo amplifier. 1 axe. Type A/B interface Alpha Module. Input : >283-325V, 0,75kW,. Output: 3A This A06B-6079-H101 axis drive is at your disposal to replace your defective equipment and has a guarantee of...

€700.00

A06B-6079-H201 - Servo Amplifier Module - FANUC

A06B-6079-H201

This FANUC 2-axis and reference A06B-6079-H201 is available to replace your equipment. SVM2-12/12. Rated input : 283-325v / Power : 1.5 kW. - Rated Output 230v~ 3.0A/3.0A This A06B-6079-H201 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,160.00

A06B-6079-H202 - Servo Amplifier Module - FANUC

A06B-6079-H202

This FANUC 2-axis and reference A06B-6079-H202 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2 kW. - Rated Output 230v~ 3.0A/5.9A This A06B-6079-H202 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,030.00

A06B-6079-H203 - Servo Amplifier Module - FANUC

A06B-6079-H203

This FANUC 2-axis and reference A06B-6079-H203 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2,5 kW. - Rated Output 230v~ 5.9A/5.9A This A06B-6079-H203 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,180.00

A06B-6079-H204 - Servo Amplifier Module - FANUC

A06B-6079-H204

This FANUC 2-axis and reference A06B-6079-H204 is available to replace your equipment. SVM2-12/40. Rated input : 283-325v / Power : 3,4 kW. - Rated Output 230v~ 3.0A/12.5A This A06B-6079-H204 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,280.00

A06B-6079-H205 - Servo Amplifier Module - FANUC

A06B-6079-H205

This FANUC 2-axis and reference A06B-6079-H205 is available to replace your equipment. SVM2-20/40. Rated input : 283-325v / Power : 3,9 kW. - Rated Output 230v~ 5.9A/12.5A This A06B-6079-H205 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,300.00

FD2A02TR-RN20 - Servo Drive - BALDOR

FD2A02TR-RN20

This reference servo drive FD2A02TR-RN20 and brand BALDOR is a Brushless motor drive. FLEXDRIVE range. Rated voltage: 230V, output current: 2.5A, 10A input circuit breaker This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€860.00

SBSC1102 - Servo Controller - BALDOR

SBSC1102

This SBSC1102 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 2A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,170.00

SBSC1105 - Servo Controller - BALDOR

SBSC1105

This SBSC1105 brushless reference and BALDOR brand is a Brushless AC motor drive. SBSC 1000/1100 Series Input: AC230V 50 / 60Hz, 3PH, Output: 5A / ACO-250V, RS232 Interface, Binary Encoder Simulation. This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,345.00

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

A16B-2203-0764 - Process I/O HE - FANUC

A16B-2203-0764

This FANUC I/O process board is part number A16B-2203-0764. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€6,350.00

A16B-1211-0970 - I/O Board - FANUC

A16B-1211-0970

This FANUC I/O board is part number A16B-1211-0970. It is part of the FANUC Series 0-C. Features: E3 I/O 104/72 DI/DO for 0-MC, 0-TC, 0-MD, 0-TD. This FANUC board is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Board reconditioned and tested on bench manufacturer (Test 100%).

€620.00

A16B-3200-0042 - CPU Board - FANUC

A16B-3200-0042

This FANUC CPU board reference A16B-3200-0042 is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0042 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€670.00

A06B-6089-H105 - Servo Amplifier Module - FANUC

A06B-6089-H105

This FANUC amplifier module with 1 axis and reference A06B-6089-H105 is a drive type AC.SVU 1-80. Input: 200-230V / Power: 17A. - Nominal output 230V ~ 17A / 18.7A This amplifier module A06B-6089-H105 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load...

€695.00

On sale!

A06B-6089-H208 - Servo Amplifier Module - FANUC

A06B-6089-H208

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H208 is a drive type AC. SVU2-80/80. Input: 200-230V/Power: 13A. - Nominal output 230V ~ 10A/10A This servo amplifier A06B-6089-H208 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,210.00

A06B-6088-H222 - Spindle Amplifier Module - FANUC

A06B-6088-H222

This FANUC reference spindle drive A06B-6088-H222#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6088-H222#H500 is at your disposal to replace your defective equipment and has a guarantee...

€1,780.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

A06B-6102-H211 - Spindle Amplifier Module - FANUC

A06B-6102-H211

This FANUC reference spindle drive A06B-6102-H211#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-11-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 48A This spindle amplifier module A06B-6102-H211#H520 is at your disposal to replace your defective equipment and has a...

€1,460.00

A20B-2100-0770 - Operator Panel PC Board - FANUC

A20B-2100-0770

This FANUC reference board A20B-2100-0770 is used for FANUC R-j3iB robots. LED: communication status with the main boardON NormalOFF Communication errorPON: Illuminates normally when the internal power supply of the panel board produces + 5V. This FANUC control board is sold with a guarantee of operation.

€1,249.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

A05B-2301-C305 - Teach Pendant - FANUC

A05B-2301-C305

This Fanuc branded reference box A05B-2301-C305 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach is reconditioned and tested on FANUC robot.

€895.00