TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE
TWDLCDA40DRF - PLC - TELEMECANIQUE

TWDLCDA40DRF - PLC - TELEMECANIQUE

TWDLCDA40DRF

This PLC TWDLCDA40DRF and TELEMECANIQUE brand is a compact 40 inputs / outputs. This controller belongs to the TWIDO range.

24 inputs / 16 outputs.

Input / output type: 24 V DC, Relay X 14, Transistors X 2.

Power supply: 24 V DC

This PLC TWDLCDA40DRF Telemecanique is at your disposal to replace your defective equipment and has a suitable guarantee

State
  • Refurbished Supply
  • New Supply
Warranty
€510.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

There are two models of Twido bases:

- Compact bases

- Modular bases

Compact bases are available with 10, 16, 24 or 40 I / O.

Modular bases are available with 20 or 40 I / O.

Additional I / O can be added to the bases using modules

I / O expansion. These are the following modules:

- 15 expansion modules of digital I / O type or relay;

- 10 expansion modules of analog I / O type.

It is also possible to add several options to the PLC databases, as shown in the table in the section - Database Options

In addition to these options, you can also add the following options:

Programming Cables
Digital I / O cables
Telefast pre-wired systems with I / O interfaces.
The connection to an AS-Interface bus interface module can also be used to manage up to 62 slave devices. Use the following module:

- AS-Interface bus master module V2: TWDNOI10M3.

Compact 24 I / O and 40 I / O bases and all modular bases can be connected to a CANopen fieldbus interface module. The CANopen master module can manage up to 16 CANopen slave devices (not exceeding 16Transmit-PDOs (TPDO) and 16Receive-PDOs (RPDO)). Use the following module:

- master module CANopen fieldbus interface: TWDNCO1M.

Advanced integrated features are available on compact bases TWDLC •• 40DRF:

 - Integrated 100Base TX Ethernet network port: TWDLCAE40DRF and TWDLCDE40DRF only;

- built-in time stamp (RTC): TWDLC •• 40DRF;

- fourth fast counter (FC): TWDLC •• 40DRF;

- External battery support: TWDLC •• 40DRF.

Height
7 cm / 2,7 in
Width
9 cm / 3,5 in
Length
16 cm / 6,2 in
Weight
0,6 kg / 1,3 lb
Family
TWIDO
Reference
TWDLCDA40DRF
Refurbished
3006816458759
300384620505

Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.

The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66