6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI
6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI

6ES5465-4UA12 - Analog Input Module - SIEMENS - SEI

6ES5465-4UA12

This SIEMENS reference module 6ES5465-4UA12 is part of the SIMATIC S5 range. S5-135U / 155U.

SIMATIC S5, 465. NON-FLOATING ANALOGUE INPUT, COMPACT VERSION U 16 INPUTS MEASUREMENT MODULE REQUIRED.

This analog input module 6ES5465-4UA12 is available to replace your defective equipment and has a guarantee adapted to your needs.

State
  • Refurbished Supply
Warranty
€60.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The analog input modules convert the analog signals from the process into digital values, which can be processed by the programmable controller.

Application of analog input modules:
- Process monitoring
- Measuring physical quantities, e.g. in mechanical en gineering, process engineering, building services automation
- Control engineering

Analog input modules with 16, 8 and 4 inputs are available. The modules require one slot.

Front connectors are used for terminating the signal cables. Modules and front connectors may be inserted and removed under power (except for the 466 input module).

Adhesive labels are supplied to identify modules and front connectors.

460 input module:
- Eight floating channels
- Sequential measured value acquisition by means of op tovoltaic multiplexer
- Measuring range selection by means of measuring range modules
- Direct acquisition of thermo couple voltages
- Direct four wire connection of resistance type sensors, e.g. Pt 100
- Power supply from L+, L S Use in large plants/machines with high common mode voltages
- For closed loop control applications with time constant ranging from seconds to infinity.

463 input module:
- Four individually isolated channels
- Simultaneous scanning of all channels within 162/3 or 20ms(50or60Hz)
- Measuring range selection via jumpers in the front connector
- Acquisition of transducer signals
- For fast, noise immune measured value acquisition even under unfavourable potential conditions
- For closed loop control ap plications where speed is a critical factor (time constants >20 ms)

465 input module:
- 16 non floating channels
- Sequential measured value acquisition with semiconductor multiplexers
- Measuring range selection by means of measuring range modules
- Direct acquisition of thermo couple voltages
- Direct four wire connection of resistance type sensors, e.g. Pt 100
- Use in small scale plants/machines where potential conditions are not a critical factor.

Common features of the 460, 463 and 465 input modules: 
- Integrating analog digital conversion with a high de gree of noise suppression at 50 (60) Hz and suppression of harmonics
- Enable input and input sig nals can be disabled
- The 460 4 input modules re quire two 498 measuring range modules
- The 465 4 input modules re quire two or four 498 mea suring range modules, depending on whether up to 8 inputs or more than 8 inputs are used

466 input module:
- Eight differential or 16 individual channels (floating)
- Instantaneous value coding S Measuring range selection through fixed wiring at the front connector
- For closed loop control applications where speed is a critical factor (time constant >4 ms).

Height
25,5 cm / 10 in
Width
18 cm / 7 in
Length
2 cm / 0,7 in
Weight
0,4 kg / 0,8 lb
Family
SIMATIC S5
Reference
6ES5465-4UA12
Refurbished
3009571853241
300820216361

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66