ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE
ATV16U09M2 - Speed Drive - TELEMECANIQUE

ATV16U09M2 - Speed Drive - TELEMECANIQUE

ATV16U09M2

This reference inverter ATV16U09M2 and brand SCHNEIDER TELEMECANIQUE is a variable speed drive for synchronous and asynchronous motors

208 / 240-50 / 60Hz Single phase 0.37kW. 0.9 kVA

This ALTIVAR (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs

State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€230.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The Altivar 16 AC drive for three-phase asynchronous squirrel cage motors incorporates the latest technology: 

- Surface mount technology - 16-bit microprocessor
- ASIC circuit
- IPM power module 

With its compact design and conformity to international standards, the Altivar 16 is a global product. A complete offering of options and accessories allows the Altivar 16 to meet all types of applications. 

The Altivar 16 is factory-set to provide: 

  • ●  Transient overtorque necessary for starting 

  • ●  Maximum available torque at low speeds with no adjustment required (from 5 to 50/60 Hz) 

  • ●  Automatic adjustment of acceleration and deceleration ramp times when the torque capabilities are exceeded.

In the Altivar 16, a high switching frequency (5 kHz, or 10 kHz for certain applications) produces a waveform with few harmonics.

This switching frequency is randomly modulated to ± 1 kHz, reducing motor noise and limiting losses in the drive.

The use of RFI filters (1) prevents radio frequency emissions from interfering with nearby antennas or conductors such as radios or televisions.

Each RFI filter kit contains in a single package:

- One filter module for the input of the drive allowing the Altivar 16 to conform to VDE871, CISPR11 and EN50011 regarding the limitation of radio frequency interference in the conduction mode

- One filter module for the output of the drive to limit interference from motor cables, ground leakage current and overvoltage at motor connections

The use of inductors on the input allows the Altivar 16 to run when supplied by lines with very low impedance or lines subject to interference from other input loads.

The use of inductors between drive and motor is recommended under certain conditions, such as when connections between drive and motor are very long, or when running several motors in parallel.

The dissipation of excess braking energy in an exterior resistor allows the Altivar 16 to function in quadrants 2 and 4 of the speed/torque curve.

Applications:

- Machines with high inertia - Overhauling loads

- Machines with fast cycles

Height
12 cm / 4,7 in
Width
15 cm / 5,9 in
Length
16 cm / 6,2 in
Weight
1,8 kg / 3,9 lbs
Family
ALTIVAR 16
Reference
ATV16U09M2
Refurbished
3000905590498
300229093969

Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.

The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66