E84AVHCE2512SX0 - Frequency Converter - LENZE

Lenze 8400 StateLine E84AVHCE2512SX0 variable frequency drive, precise speed control 0.25 kW

Designed for the recurring needs of maintenance teams and system integrators, the LENZE E84AVHCE2512SX0 variable frequency drive belongs to the 8400 StateLine range, known for reliable speed control of asynchronous three‑phase motors in machines and automation systems. This model delivers a rated power of 0.25 kW (approximately 0.34 HP), with a single‑phase 1/N/PE 230/240 V 50/60 Hz supply. It provides an output voltage of 0–230/240 V and a frequency range of 0–1000 Hz for fine speed adjustment, with a rated output current of 1.7 A. Its design simplifies control cabinet integration, deployment on existing lines and retrofit operations when older drives reach end of life. For straightforward speed‑control applications it offers streamlined commissioning, stable operation and functional compatibility with automation architectures where the programmable logic controller sets the speed reference. The objective is clear: ensure steady drive performance, control accelerations and protect the mechanical system, while remaining compact and economical to operate.

Operational benefits for continuous use

• 230 V single‑phase supply – The 1/N/PE 230/240 V 50/60 Hz connection simplifies on‑site power and enables quick replacements without major control‑panel changes.
• Wide operating range 0–1000 Hz – The broad output frequency range allows precise speed tuning, useful for variable cycle rates, low‑ or high‑speed testing and process optimisation.
• Asynchronous motor control – Suited to three‑phase asynchronous motors, variable frequency control stabilises motion, reduces jolts and limits mechanical wear.
• Compact control‑cabinet footprint – The small form factor supports neat control cabinet integration, with short cable runs and easy heat dissipation.
• Streamlined commissioning – Essential speed and ramp parameters are configured quickly. Standardised settings simplify field replacements and ensure repeatability between machines.

Technical features and build quality

The Lenze 8400 StateLine E84AVHCE2512SX0 delivers a rated power of 0.25 kW (about 0.34 HP). The input accepts 1/N/PE AC 230/240 V at 50/60 Hz, while the motor output supplies 0–230/240 V with a frequency of 0–1000 Hz. The rated output current is 1.7 A, sized for low‑power motors and light automation stations. This technical base covers a wide range of applications where speed variation is required without excessive configuration complexity. The 8400 StateLine platform favours careful, robust construction to ensure long‑term stability and simplified maintenance. The wide frequency range gives useful adjustment margins to fine‑tune speed both in production and during commissioning. The internal architecture is designed for clear wiring, with single‑phase supply and clearly identified motor terminals, reducing wiring errors and speeding up return to service after interventions. Additionally, the 8400 family philosophy promotes consistent operation across power ratings, supporting standardisation of practices across a machine fleet.

Typical uses and application environments

This variable frequency drive is well suited to simple speed‑control applications such as small conveyors, non‑critical process pumps, ventilation and extraction, roller drives in packaging, assembly stations, slow indexing mechanisms or material feed devices. In these contexts it allows cadence adjustment, smoother starts and reduced jolts on stops, contributing to process quality and protecting mechanical parts. Integrated behind a programmable logic controller, it fits naturally into a control loop where the speed setpoint is managed at the machine cell level.

Range differentiation and operational assurances

The Lenze 8400 family covers power ratings from 0.25 to 45 kW, with a consistent operational logic to simplify multi‑reference maintenance. The StateLine targets common speed‑control needs, offering a balanced compromise between features and operational simplicity. From a reliability standpoint, the preferred approach focuses on stabilising control, preserving mechanics and maintaining parameter consistency over time. Standard Exchange Industry supports these units with services tailored to industrial environments, including supply of equipment, standard exchange for rapid restart and repair when operational continuity requires it. Shipments are processed within 24 to 72 hours depending on availability, with a warranty applied according to the chosen service.

To strengthen service continuity, standardising setpoints and ramps across the fleet simplifies diagnosis in case of drift and limits downtime. The E84AVHCE2512SX0 follows this approach by providing a clear technical baseline, accessible essential parameters and consistent operation for repetitive stations. Its functional compatibility with three‑phase asynchronous motors and its 0–1000 Hz range give the latitude needed for commissioning without multiplying options. Finally, its compact format simplifies replacements in control cabinets during planned or corrective maintenance.

To equip a new station, replace an aging drive or secure a simple speed control application, select the Lenze 8400 StateLine E84AVHCE2512SX0. Our teams will advise you between supply, standard exchange and repair according to your time and budget constraints, with fast shipping and dedicated technical support.