DBSC102-GAAW - Servo Controller - BALDOR Expand

DBSC102-GAAW - Servo Controller - BALDOR



This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor.

Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA.

This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

More details

In stock, shipping within 24h.

460,00 €

livraison-2.pngQuick delivery

garantis2.pngWarranted systems

paiement-securise-SEI_1.jpgSecure Payment 

Product options

standard exchange refurbished

Standard exchange service

Reconditioned and tested systems
6 to 12 months warranty

new systems

Standard exchange service

New systems
12 to 24 months warranty

supply refurbished

Supply service

Reconditioned and tested systems
6 to 12 months warranty

supply new

Supply service

New systems
12 to 24 months warranty

supply in the state

Supply service

Systems sold in the state
without warranty

The Baldor Series Controls represent the latest technology in microprocessor based motor controls. The user programmable parameters available in every control provides the ability to customize the control to most any application.
Baldor has tried to ensure that the information in this manual is correct at the time of printing. The information is subject to change without prior notice.
This document is copyright by Baldor and is supplied with the understanding that it will not be reproduced or disclosed in whole or in part, without the express permission of Baldor.

Serial Interface

The Serial interface (DB9 connector X6) is used for communication with a PC (Personal Computer) or other equipment.
RS232 - Not available in model DBSC 10X-BXX.
For the RS232 interface, a standard shielded modem cable can be used for connection to a PC. If the cable is straight through (pin to pin), a null modem connector must be used.
These are the only RS232 signals supported by the DBSC control. Mode is jumper selectable as described in Section 4 of this manual.
RS422/RS485 - Not available in model DBSC 10X-AXX.
RS422/RS485 is a factory installed and jumper selectable in models DBSC 10X-EXX and DBSC 10X-FXX. Mode is jumper selectable as described in Section 4 of this manual.

A normally closed relay contact is provided at X3-4 and X3-5. This contact can be used to drive an external fault indicator circuit to indicate a fault condition has occurred. If a fault occurs the fault must be reset (X3-13). Wire the optional external fault indicator circuit as follows:.
1. Connect a voltage source to X3-4. (115VAC @ 0.3A or +24VDC @ 0.8A).
2. Connect the relay or circuit load to X3-5.
When a fault occurs, the internal N.C. contact will open and de-energize the Fault Circuit.

Height 18 cm / 7 in
Width 15 cm / 5,9 in
Length 7 cm / 2,7 in
Weight 1,3 kg / 2,8 lbs
Family DBSC 100 Series
Reference DBSC102-GAAW

If Service exchange, thank you describe below the defect found on your defective part.
Allowed file formats are: GIF, JPG, PNG


* required fields

No customer reviews for the moment.

Write a review

As ABB's US Motors and Generators division, ABB Motors and Mechanical Inc. market, design, manufacture and supply services for industrial electric motors, generators and mechanical power transmission products. This company was previously known as Baldor Electric Company until its merger with ABB on March 1, 2018.

The US division, headquartered in Fort Smith, Arkansas, oversees 15 manufacturing sites in 8 states.

The company sells Baldor-Reliance and ABB industrial electric motors. The products are available in IEC and NEMA configurations and range from fraction to 100,000 horsepower.

The company also sells Dodge mechanical power transmission products, including mounted bearings, enclosed gears, couplings, sheaves and bushings.


On this site, we use tools that store cookies on your device. Cookies are used to enable the site to function properly, to generate statistical reports and to advertise our services / products. With these cookies, you help us to offer you a better user experience.