6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS
6FC5447-0AA00-0AA0 - CCU Box - SIEMENS

6FC5447-0AA00-0AA0 - CCU Box - SIEMENS

6FC5447-0AA00-0AA0

This reference drive 6FC5447-0AA00-0AA0 and brand SIEMENS is a drive for SINUMERIK 810D. Module of 2x15A and 1x50A.

SINUMERIK 810D BOX CCU-BOX CONTROL BOX ELECTRONIC BOX CCU 3 INTEGR. POWER UNITS: 2 * 6A / 2A FOR 1 * 18 / 36A POWER SUPPLY OR 24A / 32A POWER SUPPLIES FOR MAIN PIN DR.

State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€1,040.00

Options produits

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Livraison
rapide

Livraison rapide

Produits
garantis

Livraison rapide

Paiement
sécurisé

 

Module racks for CCU integrated power modules: 1 x 18/36A (FSD) or 24/32A (MSD) and 2 x 6/12A (FSD), internal heat dissipation only
Module rack for the CCU integrated power modules: 2 x 9/18/A (FSD), internal/external heat dissipation 

On the SINUMERIK 810D, the number of axes can be expanded to six axes, including spindles.

There are two possibilities :
either Connect axis expansion plug-in unit and SIMODRIVE 611 power module at axis expansion interface,

or Connect SIMODRIVE 611D control plug-in unit with SIMODRIVE 611 power module on drive bus/device bus.

The axis expansion plug-in units are used whenever no more than six measur- ing channels are required for the SINUMERIK 810D. This plug-in unit is plugged into a SIMODRIVE 611 power module. The axis expansion plug-in units are designed for 1-axis and 2-axis power modules. The ribbon cables are part of the plug-in unit.

If the six measuring channels of the SINUMERIK 810D are insufficient, SIMODRIVE 611 controller plug-ins must be inserted into the SIMODRIVE 611 power modules to connect further measuring systems (connection via drive bus with drive bus terminator). If 611D control modules are used, it may be neces- sary to connect the NCU terminal block to the free drive bus connector of the 611D control.

The CCU can control up to 6 axes onboard. For this purpose there is a new expansion plug-in in addition to the existing axis expansion plug-in modules.
All power modules of the 611D series can be connected as external power modules for axis expansion.

As from SW 6.3, the limitation to six drives applies.
Expansion levels 1 to 6 can be achieved by many combinations. To operate the spindle to the internal power module, connect it to the 24A/32A power module (A1).

Height
47 cm / 18,50 in
Width
29 cm / 11,4 in
Length
15 cm / 5,9 in
Weight
10 kg / 22 lbs
Family
SINUMERIK
Reference
6FC5447-0AA00-0AA0
Refurbished
3005196593579
300403947088

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66