DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT
DDS02.1-W050-D - Servo Controller - INDRAMAT

DDS02.1-W050-D - AC Servo Controller - INDRAMAT

DDS02.1-W050-D

This INDRAMAT DDS02.1-W050-D reference AC servo controller is designed for INDRAMAT MDD, MKD and LAR motors.

Servo controller : 50A, Series 2, Configuration 1. Rated voltage of 300V.

This INDRAMAT servo controller is at your disposal to replace your defective equipment and has a suitable guarantee.

AC Servo controller tested on engine test bench.

State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€690.00

Services options

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

Digital intelligent AC servo drives are micro Processor controlled brushless three-phase AC drives with outstanding servo control characteristics in terms of dynamic response and precision.

Excellent performance data, flexible operating modes and applications- orientated functions offer the ideal pre-requisites for:

- CNC machine tool axes
- Electronic transmissions
- Grinding machines
- Robots
- Handling systems
- Assembly equipment
- Woodworking machines
- Packaging machines
- Textile machines
- Printing machines

All drive control, monitoring, parametrizing and diagnostics functions are digital - employing a signal processor - with an extremely high-resolution measurement of the rotor position over the entire speed range.

INDRAMAT digital intelligent AC servo drives can be supplied with either of two interfaces:
- SERCOS interface 
- ANALOG interface


The full range of possibilities and benefits of digital intelligent drives can only be exploited through the SERCOS interface. These indude:

- Display and entry of all intemal drive data, parameters and diagnoses via the SERCOS terminal of compatible NC controls.

- Exploitation of the high speed resolution of 0.0001 rpm up to maximum speed.

- Exploitation of the drive's interna lfine interpolation and positioncontrol loop (cycle time 0.250 ms, resolution 0.00001 mm to 180 mlmin with linear scales with a graticule constant of 20~ free of followin gerror) for positioning, contouring and C-axis mode including the high-velocity range.

- Normalization of position, velocity, acceleration and load data as well as adaptation of machine parameters, such as gearbox, spindle pitch, etc.

- Reducing the complexity of NC controls, wiring and position encoders.

Digital intelligent AC servo drives are of modular construction.

The modular principle allows flexible combination of AC servo drives and AC main spindle drives of different power ratings to form compact drive packages with one common power supply module.

The available power supply modules for AC servo drives may be connected up directly to international three-phase power mains of 3 x AC (380 to 460) V, (50-60) Hz.

A digital intelligent AC servo drive consists in each case of a carefully matched combination of AC servo motor MOD and a DDS 2.1 drive controller.

Height
39 cm / 15,3 in
Width
31 cm / 12,2 in
Length
11 cm / 4,3 in
Weight
8,5 kg / 18,7 lbs
Family
DDS - INDRAMAT
Reference
DDS02.1-W050-D
Refurbished
3002661286486
300415854275

Indramat is an industrial company founded in 1958, based in Neuwied, Germany.
Indramat Gmbh , which is now part of Bosch Rexroth , was an industrial control company founded in 1958, based in Neuwied (am Rhein), Germany. Its name is a German abbreviation meaning «Gesellschaft zur IND ustrialisierung- RA tionalisierung und Auto MAT isierung».

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66