A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC
A06B-6112-H030 - Spindle Amplifier Module - FANUC

A06B-6112-H030 - Spindle Amplifier Module - FANUC

A06B-6112-H030

This A06B-6112-H030#570 and FANUC brand spindle amplifier module is available in stock. This spindle amplifier module is part of the SERVO AMPLIFIER αi SERIESαi SP 30.

Input: 283-339V, 35kW, 240v ~ 133A rated output. TYPE B interface.

This spindle amplifier module A06B-6112-H030#570 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

State
  • Refurbished Supply
Warranty
€5,260.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

αi PS series (Power Supply)

The αi PS series power supplies are used as a main power supply of motor power and as a common power supply to supply control power to servo amplifiers. Select an appropriate Power Supply according to the output levels of the servo motor and spindle motor used.

There are three types of αi PS series, as follows:

<1> 200-V input series
This Power Supply is designed to provide a main power supply of 200 to 240 V. The module uses power regeneration that returns energy to the power supply during motor deceleration (regeneration).
<2> 400-V input series
This Power Supply can be connected to a main power supply of 400 to 480V without a transformer. The module uses power regeneration that returns energy to the power supply during motor deceleration (regeneration). It is used together with a αi SV series and αi SP series of the 400-V input series.
<3> αi PSR series
This Power Supply is designed to provide a main power supply of 200 to 240 V. The module uses resistance regeneration that allows energy to be consumed by resistance during motor deceleration (regeneration).
<4> Regenerative discharge unit
This unit is a resistance used to consume energy during motor deceleration (regeneration). This unit is required whenever the αi PSR is used.

αi SV series (Servo Amplifier)

The αi SV series amplifiers are used to drive a servo motor. Select an appropriate amplifier according to the servo motor connected.

There are two types of αi SV series, as follows:

<1> 200-V input series
This Amplifier drives a servo motor of the 200-V input series. Amplifiers for one axis, two axes, and three axes are available.
<2> 400-V input series
This Amplifier drives a servo motor of the 400-V input series

αi SP series (Spindle Amplifier)

The αi SV series amplifiers are used to drive a spindle motor. Select an appropriate amplifier according to the spindle motor connected.

There are two types of αi SP series, as follows:
<1> 200-V input series
This Amplifier drives a spindle motor of the 200-V input series.
<2> 400-V input series
This Amplifier drives a spindle motor of the 400V input series.

Height
38 cm / 14,9 in
Width
15 cm / 5,9 in
Length
27,2 cm / 10,71 in
Weight
11 kg / 24,2 lbs
Power
35 kW
Family
FANUC ALPHA I SERVO aiSV
Reference
A06B-6112-H030
Refurbished
3000500455901
300177050397

FANUC is a Japanese manufacturer of industrial robots, machining centers and numerical controls for machine tools

Since its creation in 1956, when the company’s founder, Dr. Seiuemon Inaba, introduced the concept of digital controls, FANUC has always been at the forefront of manufacturing techniques in the world. Moving from the automation of a single machine in the late 1950s to the automation of entire production lines over the following decades.

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66