Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE
XBT G5330 - HMI - TELEMECANIQUE

XBT G5330 - HMI - TELEMECANIQUE

XBTG5330

This terminal XBTG5330 and brand TELEMECANIQUE is a terminal of the MAGELIS range.

Advanced Touchscreen - 640 x 480 pixels VGA - 10.4 "- TFT LCD - 24 V DC, Ethernet port.

This terminal XBTG5330 Télémécanique is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Supply
Warranty
€1,200.00
VAT excluded

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

- This appliance must be installed and used by qualified persons.
- Switch off the device before any intervention.
- Make sure the power supply conforms to the requirements of XBTG.
- Do not use any sharp or pointed object and do not exert any excessive pressure on the touch panel as this may damage the panel or the display.
- Do not expose the unit to temperature variations which may cause internal condensation.
- XBTG must not be stored or used in a room with acids and volatile chemicals (organic solvents, for example).
- Corrosive chemicals: acids, alkali, salt-based liquids.
- Flammable chemicals: organic solvents.
- Do not use thinners or organic solvents to clean the XBTG.

- The liquid crystal display should not be stored or used in a room exposed to direct light as UV rays from the sun may deteriorate the display quality.
- Exposing this unit to temperatures above or below those recommended may deteriorate the panel.
- It is recommended to perform vertical mounting.
- After turning off the XBTG, wait 30 seconds before turning it back on. If you start the XBTG too quickly, it does not start correctly.
- In order to optimize the service life of the product, leave a ventilation area of ​​100 mm around live components.
- Any modification other than those specified in this manual voids the product warranty.
- When using scripts to display screens, ensure that they do not appear in pop-up windows. The image may be cropped in the pop-up window.
- Vibration mode is not available on the XBTG; this mode is reserved for future use.
- In modification mode with the virtual numeric keypad displayed, any modification of the active input zone (outside the numeric keypad window) results in the closing of the numeric keypad and the loss of the input data.
- During the design phase of the project, verify that only one protocol is configured for a communication port. It is not possible to assign more than one protocol to the same port.
- In case of sound distortion, check the sound file format (* .wav) used and make sure it is formatted for 16 bit, 11 kHz

Height
24,5 cm / 9,6 in
Width
31 cm / 12,2 in
Length
5.9 cm / 2.32 in
Weight
3.4 kg / 7.45 lbs
Family
MAGELIS
Reference
XBTG5330
Refurbished
3009494092864
300820302590

Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.

The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).

16 other products in the same category: