6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS
6FC5247-0AA00-0AA0 - NCU Box - SIEMENS

6FC5247-0AA00-0AA0 - NCU Box - SIEMENS

6FC5247-0AA00-0AA0

This backplane module 6FC5247-0AA00-0AA0 SIEMENS is used for the SINUMERIK 840D range.

SINUMERIK 840D/DE NCU BOX FOR INSTALLATION OF NCU 561.2 / 561.3 / 561.4 / 571 / 571.2 / 571.3 / 571.4 / 572 / 572.2 / 572.3 / 573.4 / 573.2 / 573.3 / 573.4 / 573.5 WITH POWER UNIT, BATTERY AND FAN

This module 6FC5247-0AA00-0AA2 Siemens is at your disposal to replace your defective equipment and has a warranty

State
  • Refurbished Supply
Warranty
€235.00

Options produits

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Livraison
rapide

Livraison rapide

Produits
garantis

Livraison rapide

Paiement
sécurisé

 

The NCU box is the module rack of the NCU module and consists of:
- NC rack assembly with cable distributor
- Battery/fan slide-in module
- Sheet metal housing with integrated guide bars for accommodating the NCU and the fan/battery slide-in modules and power supply unit
Order number: 6FC5247-0AA00-0AA3
The fan box is absolutely required for the 573.3 (Pentium III) and 573.4 (Pen- tium III) NCUs. Mount the fan box to the NCU box if necessary.
Order number: 6FC5247-0AA30-0AA0
As a submodule of the NCU, the PLC module supports machine monitoring and represents a PLC-CPU that is compatible to the S7-300 family of products. Via the P bus, three external lines can be connected for every eight S7-300 peripheral modules.

The components of the SINUMERIK 840D are compatible with the module se- ries SIMODRIVE 611D. The 840D is operated with the power supply of SIMODRIVE 611 and the SIMODRIVE 611D drive modules.

Height
5 cm / 1,9 in
Width
29 cm / 11,4 in
Length
48
Weight
3,5 kg / 7,7 lbs
Family
SINUMERIK
Reference
6FC5247-0AA00-0AA0
Refurbished
3000031195321
300031195325

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

10 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66