Brushless Controlers

Showing 1-36 of 56 item(s)

BSC1010 - Servo Controller - BALDOR

BSC1010

This brushless reference drive BSC1010 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: DC320V Output: 10A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,240.00

BSC1115-24 - Servo Controller - BALDOR

BSC1115-24

This brushless reference drive BSC1115-24 and BALDOR brand is a drive for Brushless AC motor. BSC 1000/1100 Series Input: AC230V, 50/60Hz, Three phase Output: 15A / ACO-250V This BALDOR drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€3,210.00

R7D-APA3H - Servodrive - OMRON

R7D-APA3H

This OMRON servodrive and reference R7D-APA3H is part of the series SMARTSTEP A.R7D-APA3H : Single phase 200V - 30W, filter R88A-FIW104This R7D-APA3H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€310.00

R7D-APA5H - Servodrive - OMRON

R7D-APA5H

This OMRON servodrive and reference R7D-APA5H is part of the series SMARTSTEP A.R7D-APA5H : Single phase 200V - 50W, filter R88A-FIW104This R7D-APA5H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€420.00

R7D-AP01H - Servodrive - OMRON

R7D-AP01H

This OMRON servodrive and reference R7D-AP01H is part of the series SMARTSTEP A.R7D-AP01H : Single phase 200V - 100W, filter R88A-FIW104This R7D-AP01H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€495.00

R7D-AP02H - Servodrive - OMRON

R7D-AP02H

This OMRON servodrive and reference R7D-AP02H is part of the series SMARTSTEP A.R7D-AP02H : Single phase 200V - 200W, filter R88A-FIW104This R7D-AP02H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€890.00

R7D-AP04H - Servodrive - OMRON

R7D-AP04H

This OMRON servodrive and reference R7D-AP04H is part of the series SMARTSTEP A.R7D-AP04H : Single phase 200V - 400W, filter R88A-FIW107This R7D-AP04H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€455.00

R7D-AP08H - Servodrive - OMRON

R7D-AP08H

This OMRON servodrive and reference R7D-AP08H is part of the series SMARTSTEP A.R7D-AP08H : Single phase 200V - 750W, filter R88A-FIW115This R7D-AP08H servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€1,810.00

R7D-APA3L - Servodrive - OMRON

R7D-APA3L

This OMRON servodrive and reference R7D-APA3L is part of the series SMARTSTEP A.R7D-APA3L : Single phase 100/115V AC, 50/60Hz - 30WThis R7D-APA3L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€380.00

R7D-APA5L - Servodrive - OMRON

R7D-APA5L

This OMRON servodrive and reference R7D-APA5L is part of the series SMARTSTEP A.R7D-APA5L : Single phase 100/115V AC, 50/60Hz - 50WThis R7D-APA5L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€460.00

R7D-AP01L - Servodrive - OMRON

R7D-AP01L

This OMRON servodrive and reference R7D-AP01L is part of the series SMARTSTEP A.R7D-AP01L : Single phase 100/115V AC, 50/60Hz - 100WThis R7D-AP01L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€580.00

R7D-AP02L - Servodrive - OMRON

R7D-AP02L

This OMRON servodrive and reference R7D-AP02L is part of the series SMARTSTEP A.R7D-AP02L : Single phase 100/115V AC, 50/60Hz - 200WThis R7D-AP02L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€670.00

R7D-AP04L - Servodrive - OMRON

R7D-AP04L

This OMRON servodrive and reference R7D-AP04L is part of the series SMARTSTEP A.R7D-AP04L : Single phase 100/115V AC, 50/60Hz - 400WThis R7D-AP04L servodrive is available to replace your defective equipment.Servodrive reconditioned and tested under full load (test duration) on OMRON bench.

€760.00

KDA 3.3-150-3-A00-W1 - AC Spindle Drive - INDRAMAT

KDA 3.3-150-3-A00-W1

This INDRAMAT reference mainspindle drive KDA 3.3-150-3-A00-W1 is designed for INDRAMAT 2AD and 1MB motors. KDA 3.3-150-3-A00-W1 MAINSPINDLE DRIVE, 150A, 300V, ANGLE SPEED ANALOG +/- 10V, WITHOUT AUXILIARY INPUT, WITHOUT AUXILIARY INTERFACE, AC SUPPLY VOLTAGE FOR HEAT SINK 220V/50-60 Hz This INDRAMAT drive is at your disposal to replace your defective...

€3,360.00

KDA 1.1-100-300-W1-220 - AC Spindle Drive - INDRAMAT

KDA 1.1-100-300-W1-220

This INDRAMAT reference mainspindle drive KDA 1.1-100-300-W1-220 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-100-300-W1-220 INDRAMAT AC-MAINSPINDLE DRIVE, 100A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 220V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€3,650.00

KDA 1.1-150-300-W1-220 - AC Spindle Drive - INDRAMAT

KDA 1.1-150-300-W1-220

This INDRAMAT reference mainspindle drive KDA 1.1-150-300-W1-220 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-150-300-W1-220 INDRAMAT AC-MAINSPINDLE DRIVE, 150A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 220V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€1,900.00

KDA 1.1-150-300-W1-115 - AC Spindle Drive - INDRAMAT

KDA 1.1-150-300-W1-115

This INDRAMAT reference mainspindle drive KDA 1.1-150-300-W1-115 is designed for INDRAMAT 2AD and 1MB motors. KDA 1.1-150-300-W1-115 INDRAMAT AC-MAINSPINDLE DRIVE, 150A, 300V, AC SUPPLY VOLTAGE FOR HEAT SINK 115V / 50-60 Hz FORCED COOLING BY COOLANT FAN This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€1,900.00

KDA 2.1-100-3-A00-W1 - AC Spindle Drive - INDRAMAT

KDA 2.1-100-3-A00-W1

This INDRAMAT reference mainspindle drive KDA 2.1-100-3-A00-W1 is designed for INDRAMAT 2AD and 1MB motors. KDA 3.3-150-3-A00-W1 MAINSPINDLE DRIVE, 100A, 300V, ANGLE SPEED ANALOG +/- 10V, WITHOUT AUXILIARY INPUT, WITHOUT AUXILIARY INTERFACE, 50-60 Hz This INDRAMAT drive is at your disposal to replace your defective equipment and has a suitable guarantee.

€3,600.00

KDA 2.1-150-300-A00-W1-220 - AC Spindle Drive - INDRAMAT

KDA 2.1-150-300-A00-W1-220

This INDRAMAT reference mainspindle drive KDA 2.1-150-300-A00-W1-220 is designed for INDRAMAT 2AD and 1MB motors KDA 2.1-150-300-A00-W1 MAINSPINDLE DRIVE, 150A, 300V, ANGLE SPEED ANALOG +/- 10V,WITHOUT AUXILIARY INPUT,WITHOUT AUXILIARY INTERFACE, AC SUPPLY VOLTAGE FOR HEAT SINK 220V/50-60 Hz This INDRAMAT drive is at your disposal to replace your...

€2,860.00

MR-J3-10A - Servo Amplifier - MITSUBISHI

MR-J3-10A

This MITSUBISHI servo amplifier, reference MR-J3-10A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053, HF-MP13, HF-KP053, HF-KP13 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-10A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to...

€380.00

MR-J3-20A - Servo Amplifier - MITSUBISHI

MR-J3-20A

This MITSUBISHI servo amplifier, reference MR-J3-20A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.5A Mitsubishi AC servo drive for HF-MP23, HF-KP23 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-20A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€420.00

MR-J3-40A - Servo Amplifier - MITSUBISHI

MR-J3-40A

This MITSUBISHI servo amplifier, reference MR-J3-40A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 2.8A Mitsubishi AC servo drive for HF-MP43, HF-KP43 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-40A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€420.00

MR-J3-60A - Servo Amplifier - MITSUBISHI

MR-J3-60A

This MITSUBISHI servo amplifier, reference MR-J3-60A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 3.2A Mitsubishi AC servo drive for HF-SP51 and HF-SP52 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-60A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€560.00

MR-J3-70A - Servo Amplifier - MITSUBISHI

MR-J3-70A

This MITSUBISHI servo amplifier, reference MR-J3-70A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 5.8A Mitsubishi AC servo drive for HF-MP73, HF-KP73 and HC-UP72 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-70A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your...

€600.00

MR-J3-100A - Servo Amplifier - MITSUBISHI

MR-J3-100A

This MITSUBISHI servo amplifier, reference MR-J3-100A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 6.0A Mitsubishi AC servo drive for HF-SP81, HF-SP102 and HC-LP101 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-100A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€680.00

MR-J3-200A - Servo Amplifier - MITSUBISHI

MR-J3-200A

This MITSUBISHI servo amplifier, reference MR-J3-200A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 11.0A Mitsubishi AC servo drive for HF-SP121, HF-SP201, HP-SP152 and HF-SP202 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-200A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted...

€820.00

MR-J3-350A - Servo Amplifier - MITSUBISHI

MR-J3-350A

This MITSUBISHI servo amplifier, reference MR-J3-350A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 17.0A Mitsubishi AC servo drive for HF-SP301, HF-SP352, HC-RP103 and HC-RP153 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-350A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted...

€985.00

MR-J3-500A - Servo Amplifier - MITSUBISHI

MR-J3-500A

This MITSUBISHI servo amplifier, reference MR-J3-500A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 28.0A Mitsubishi AC servo drive for HF-SP421, HF-SP502, HC-RP353, HC-RP503 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-500A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to...

€1,380.00

MR-J3-700A - Servo Amplifier - MITSUBISHI

MR-J3-700A

This MITSUBISHI servo amplifier, reference MR-J3-700A is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 37A Mitsubishi AC servo drive for HF-SP702, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-700A servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€1,820.00

MR-J3-11KA - Servo Amplifier - MITSUBISHI

MR-J3-11KA

This MITSUBISHI servo amplifier, reference MR-J3-11KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 68A Mitsubishi AC servo drive for HA-LP801/12K1, HA-LP11K1M/11K2, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-11KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€3,100.00

MR-J3-15KA - Servo Amplifier - MITSUBISHI

MR-J3-15KA

This MITSUBISHI servo amplifier, reference MR-J3-15KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 87A Mitsubishi AC servo drive for HA-LP15K1/15K1M/15K2, servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-15KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€4,730.00

MR-J3-22KA - Servo Amplifier - MITSUBISHI

MR-J3-22KA

This MITSUBISHI servo amplifier, reference MR-J3-22KA is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 126A Mitsubishi AC servo drive for HA-LP20K1/25K1/22K1M/22K2 servo motors. 3PH, 200 to 230VAC, 50/60Hz. This MR-J3-22KA servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€5,260.00

MR-J3-10A1 - Servo Amplifier - MITSUBISHI

MR-J3-10A1

This MITSUBISHI servo amplifier, reference MR-J3-10A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053/13, HP-KP053/13. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-10A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€300.00

MR-J3-20A1 - Servo Amplifier - MITSUBISHI

MR-J3-20A1

This MITSUBISHI servo amplifier, reference MR-J3-20A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.5A Mitsubishi AC servo drive for HF-MP23, HP-KP23. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-20A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€380.00

MR-J3-40A1 - Servo Amplifier - MITSUBISHI

MR-J3-40A1

This MITSUBISHI servo amplifier, reference MR-J3-40A1 is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 2.8A Mitsubishi AC servo drive for HF-MP43, HP-KP43. 1 PH, 100 to 120 VAC, 50/60Hz. This MR-J3-40A1 servo amplifier is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€520.00

MR-J3-10B - Servo Amplifier - MITSUBISHI

MR-J3-10B

This MITSUBISHI servo amplifier, reference MR-J3-10B is an AC servo drive. It belongs to the MELSERVO-J3 Series range. 1.1A Mitsubishi AC servo drive for HF-MP053, HF-MP13, HF-KP053 et HF-KP053 et HF-KP13 servo motors. 3PH or 1PH, 200 to 230VAC, 50/60Hz. This MR-J3-10B servo amplifier is at your disposal to replace your defective equipment and has a...

€165.00