Drives

A06B-6105-H003 - Servo Amplifier - FANUC

A06B-6105-H003

6-axis drive for F-200iB/M-6iB/ArcMate 100iB robot (or other compatible model). KUKA, ABB... Input : 200-240V 1,5kW. Output : 6x13AIncludes a 6-axis A16B-2000-0063/06C power board, and a servo control board A16B-3200-0440/04CThis A06B-6105-H003 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€3,420.00

6SE6400-0BP00-0AA0 - Basic Operator Panel - SIEMENS

6SE6400-0BP00-0AA0

This reference control panel 6SE6400-0BP00-0AA0 and brand SIEMENS is used for the range MICROMASTER 420 and 440. SIEMENS MICROMASTER 4 BASIC OPERATOR PANEL (BOP) This SIEMENS control panel is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€65.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

R88M-U75030VA-S1 - Servo motor - OMRON

R88M-U75030VA-S1

This OMRON R88M-U75030VA-S1 servo motor is a OMNUC U series motor. Characteristics: 230V, 750W, 4.4A with Incremental Encoders for R88D-UA20V. servo drive. This R88M-U75030VA-S1 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€400.00

SJDE-01ANA-0Y - Servo Drive - OMRON

SJDE-01ANA-0Y

This OMRON servo drive has the reference SJDE-01ANA-0Y. It corresponds to the OMRON JUNMA ML-II range of servo drives. Servo drive: 100W. Input : 200 to 230V, 1 PH, 50/60Hz, Max output : 2.5A This OMRON servo drive is reconditioned and tested on the bench manufacturer (100% test)

€495.00