Catalog

A20B-1000-0852 - Graphic Board - FANUC

A20B-1000-0852

This FANUC brand graphic board A020B-1000-0852 for sale in exchange or standard. Video card A020B-1000-0852 reconditioned and tested under full load (duration test) on Fanuc 10 and 11 bench. This A020B-1000-0852 video card comes with a warranty.

€530.00

KDV 2.3-100-220/300-000 - Power Supply - INDRAMAT

KDV 2.3-100-220/300-000

This INDRAMAT KDV 2.3-100-220/300-000 power supply module is designed for INDRAMAT CNC machine tools. It is part of the KDV-INDRAMAT range. Continuous mechanical power : 24 kW, line voltage: 3x220 V AC, 3x230 V AC, DC bus DC supply: 30 kW. This INDRAMAT KDV 2.3-100-220/300-000 power supply powers the KDS / KDA series drives.

€1,440.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

On sale!

KDV 1.3-100-220/300-W1 - Power Supply - INDRAMAT

KDV 1.3-100-220/300-W1

This INDRAMAT KDV 1.3-100-220/300-W1 power supply module is designed for INDRAMAT CNC machine tools. It is part of the KDV-INDRAMAT range. Power input: 3x220 VAC, average current: 100A, power: 30 kW. This INDRAMAT KDV 1.3-100-220/300-W1 power supply powers the KDS / TDM series drives.

€990.00

KDV 2.2-100-220/300-220 - Power Supply - INDRAMAT

KDV 2.2-100-220/300-220

This INDRAMAT KDV 2.2-100-220/300-220 power supply module is designed for INDRAMAT CNC machine tools. It is part of the KDV-INDRAMAT range. Power input: 300V DC, average current: 100A, power: 30 kW. This INDRAMAT KDV 2.2-100-220/300-220 power supply powers the KDS/TDM series drives.

€1,520.00

KDV 2.2-100-220/300-W1 - Power Supply - INDRAMAT

KDV 2.2-100-220/300-W1

This INDRAMAT KDV 2.2-100-220/300-W1 power supply module is designed for INDRAMAT CNC machine tools. It is part of the KDV-INDRAMAT range. Power input: 300V DC, average current: 100A, power: 30 kW. This INDRAMAT KDV 2.2-100-220/300-W1 power supply powers the KDS/TDM series drives.

€1,650.00

FN-XY16SC41 - I/O Module - PROFACE

FN-XY16SC41

This reference I/O module FN-XY16SC41 and PROFACE brand is part of the SP5000 range. 16 discrete points, 16 point input, transistor output This reconditioned and tested PROFACE automaton is at your disposal to replace your defective equipment and has a guarantee.

€385.00