Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Catalog

A20B-1000-0852 - Graphic Board - FANUC

A20B-1000-0852
This FANUC brand graphic board A020B-1000-0852 for sale in exchange or standard. Video card A020B-1000-0852 reconditioned and tested under full load (duration test) on Fanuc 10 and 11 bench. This A020B-1000-0852 video card comes with a warranty.
€530.00

MA4/200.7301-M - Robot Controller Module Unit - BOSCH

MA4/200.7301-M
This MA4/200.7301-M and BOSCH reference axis control module is part of the TURBOSCARA SR6, SR6 PLUS and SR8 range. MA4 / 200.7301-M: Input 3AC 230V 50/60 Hz, output: 10 / 7.5 / 5 / 5A. This control module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€2,145.00

CACR-IR-050505FC - Servo control system - YASKAWA

CACR-IR-050505FC
This CACR-IR-050505FC and YASKAWA brand servo drive is a servo system from the IR SERVO range. CACR-IR-050505FC: Main circuit: 3x230V, control circuit: 230V single phase. 3 axis, 0.5kW, 4.2A. This YASKAWA servo drive is at your disposal to replace your defective equipment and have an appropriate guarantee.
€725.00

CACR-IR-010101FC - Servo control system - YASKAWA

CACR-IR-010101FC
This CACR-IR-010101FC and YASKAWA brand servo drive is a servo system from the IR SERVO range. CACR-IR-010101FC: Main circuit: 3x230V, control circuit: 230V single phase. 3 axis, 1kW, 7.6A. This YASKAWA servo drive is at your disposal to replace your defective equipment and have an appropriate guarantee.
€795.00

CACR-IR-30SFB - Servo control system - YASKAWA

CACR-IR-30SFB
This CACR-IR-30SFB and YASKAWA brand servo drive is a servo system from the IR SERVO range. CACR-IR-30SFB : Main circuit: 3x230V, control circuit: 230V single phase. 1 axis, 3kW, 26A. This YASKAWA servo drive is at your disposal to replace your defective equipment and have an appropriate guarantee.
€890.00

CP10G-04 - HMI terminal - EXOR

CP10G-04
This EXOR reference CP10G-04 HMI screen is part of the UniOP series. CP10G-04: 24V; Monochrome LCD screen; memory: 16KB. This EXOR terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Device 100% tested.
€790.00