Catalog

A20B-1000-0852 - Graphic Board - FANUC

A20B-1000-0852

This FANUC brand graphic board A020B-1000-0852 for sale in exchange or standard. Video card A020B-1000-0852 reconditioned and tested under full load (duration test) on Fanuc 10 and 11 bench. This A020B-1000-0852 video card comes with a warranty.

€530.00

MTS-140-08/16-247/T - Servo Drive - AXOR

MTS-140-08/16-247/T

This AXOR servo drive, reference MTS-140-08/16-247/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-247/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€450.00

MTS-140-08/16-RX-S-0247/TO-RD - Servo Drive - AXOR

MTS-140-08/16-RX-S-0247/TO-RD

This AXOR servo drive, reference MTS-140-08/16-RX-S-0247/TO-RD is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-RX-S-0247/TO-RD is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€485.00

MTS-140-20/40-248/T - Servo Drive - AXOR

MTS-140-20/40-248/T

This AXOR servo drive, reference MTS-140-20/40-248/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 20A 250V - 95 Vac. 3 phases This servo drive MTS-140-20/40-248/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€790.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00