Catalog

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

650/007/400/0/00/DISP/FR/0/0 - AC Inverter - EUROTHERM

650/007/400/0/00/DISP/FR/0/0

This EUROTHERM drive, reference 650/007/400/0/00/DISP/FR/0/0 is an AC drive. It belongs to the SSD Drive 650 series. EUROTHERM AC controller of 0,75 kW, 2,5 A. 380-460 Vac - 50 Hz. 3 phases This 650/007/400/0/00/DISP/FR/0/0 Inverter is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€430.00

650/015/400/0/00/DISP/FR/0/0 - AC Inverter - EUROTHERM

650/015/400/0/00/DISP/FR/0/0

This EUROTHERM drive, reference 650/015/400/0/00/DISP/FR/0/0 is an AC drive. It is part of the SSD Drive 650 series. EUROTHERM AC drive of 1.5 kW, 4.5 A. 380-460 Vac - 50 Hz. 3 phases This 650/015/400/0/00/DISP/FR/0/0 Inverter is at your disposal to replace your defective equipment and has a warranty adapted to your needs.

€370.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

R88D-1SN08H-ECT - Servo Drive - OMRON

R88D-1SN08H-ECT

This OMRON servo drive is reference R88D-1SN08H-ECT. It matches the 1S Sysmac servo drive range. Servo drive : Input: 230V single phase, 50/60Hz, Output: 7.3A, 750W. Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€360.00

R88M-1M75030T-S2 - Servo motor - OMRON

R88M-1M75030T-S2

This OMRON R88M-1M75030T-S2 servo motor is a SYSMAC 1S series motor. Characteristics: 230V, 750W, 4.6A for R88D-1SN08H-ECT. servo drive. This R88M-1M75030T-S2 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00