Catalog

Showing 1-36 of 241 item(s)

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

NT21-ST121B-E - Programmable Terminal - OMRON

NT21-ST121B-E

This NT21-ST121B-E terminal and OMRON brand is a terminal from the NT range. MONOCHROME STN LCD, 24VDC, 7W This NT21-ST121B-E OMRON terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,770.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

FAS 4008 - Servo Converter - STÖBER

FAS 4008

This servo motor reference FAS 4008 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4008: N+1x230V, 0.37kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,800.00

FAS 4016 - Servo Converter - STÖBER

FAS 4016

This servo motor reference FAS 4016 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4016: N+1x230V, 0.75kW, 4A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€500.00

FAS 4009 - Servo Converter - STÖBER

FAS 4009

This servo motor reference FAS 4009 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4009: 3x400V, 0.37kW, 1.3A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,000.00

FAS 4014 - Servo Converter - STÖBER

FAS 4014

This servo motor reference FAS 4014 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4014: 3x400V, 0.75kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€630.00

FAS 4020 - Servo Converter - STÖBER

FAS 4020

This servo motor reference FAS 4020 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4020: 3x400V, 1.1kW, 2.9A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,525.00

FAS 4028 - Servo Converter - STÖBER

FAS 4028

This servo motor reference FAS 4028 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4028: 3x400V, 1.5kW, 4A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€500.00

FAS 4038 - Servo Converter - STÖBER

FAS 4038

This servo motor reference FAS 4038 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4038: 3x400V, 2.2kW, 5.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,490.00

FAS 4050 - Servo Converter - STÖBER

FAS 4050

This servo motor reference FAS 4050 and Stöber brand is a drive from the POSIDRIVE FAS 4000 range. FAS 4050: 3x400V, 3kW, 7A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,740.00

NT631C-ST141-EV2 - Programmable Terminal - OMRON

NT631C-ST141-EV2

This OMRON brand NT631C-ST141-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color STN LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,220.00

NT631C-ST141B-EV2 - Programmable Terminal - OMRON

NT631C-ST141B-EV2

This OMRON brand NT631C-ST141B-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color STN LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,220.00

NT631C-ST151B-EV2 - Programmable Terminal - OMRON

NT631C-ST151B-EV2

This OMRON brand NT631C-ST151B-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color TFT LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,145.00

NT631C-ST151-EV2 - Programmable Terminal - OMRON

NT631C-ST151-EV2

This OMRON brand NT631C-ST151-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color TFT LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,145.00

NT631C-ST211-EV2 - Programmable Terminal - OMRON

NT631C-ST211-EV2

This OMRON brand NT631C-ST211-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, High Contrast EL, Black and white This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00

NT631C-ST211B-EV2 - Programmable Terminal - OMRON

NT631C-ST211B-EV2

This OMRON brand NT631C-ST211B-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, High Contrast EL, black and white This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00

NT31C-ST141B-EV2 - Programmable Terminal - OMRON

NT31C-ST141B-EV2

This OMRON brand NT31C-ST141B-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color STN LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€690.00

NT31C-ST141-EV2 - Programmable Terminal - OMRON

NT31C-ST141-EV2

This OMRON brand NT31C-ST141-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Color STN LCD, 8 colors This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€690.00

NT31-ST121-EV2 - Programmable Terminal - OMRON

NT31-ST121-EV2

This OMRON brand NT31-ST121-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Monochrome STN LCD , black and white This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00

NT31-ST121B-EV2 - Programmable Terminal - OMRON

NT31-ST121B-EV2

This OMRON brand NT31-ST121B-EV2 Human Machine Interface belongs to the NT SERIES range. Features: 24V, 18W, Monochrome STN LCD , black and white This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

NT21-ST121-E - Programmable Terminal - OMRON

NT21-ST121-E

This OMRON brand NT21-ST121-E Human Machine Interface belongs to the NT SERIES range. Features: 24V, 7W, Monochrome STN LCD , black and white This OMRON programmable terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,350.00

X20IF2772 - Interface Module - B&R

X20IF2772

This B&R interface module is reference X20IF2772. It belongs to the X20 range. X20 interface module, 2 CAN bus interfaces, max. 1 Mbit/s, electrically isolated, order 2x terminal block TB2105 separately This B&R module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€660.00