Catalog

On sale!

A06B-6077-H111 - Power Supply - FANUC

A06B-6077-H111

This power supply A06B-6077-H111 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H111 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€790.00

A06B-6077-H106 - Power Supply - FANUC

A06B-6077-H106

This power supply A06B-6077-H106 Alpha Fanuc is at your disposal. Fanuc PSM-5.5 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H106 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€1,185.00

A06B-6087-H115 - Power Supply Module - FANUC

A06B-6087-H115

This power supply A06B-6087-H115 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply. Input: 200-230V, 63A, 50 / 60Hz, 3ph, output: 17.5kW. This Alpha Fanuc A06B-6087-H115 power supply is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench.

€1,740.00

X20AI1744 - Analog input module - B&R

X20AI1744

This B&R analog input module is reference X20AI1744. It belongs to the X20 range. 1 full bridge strain gauge input, 24-bit converter resolution. 5 kHz input filter This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

X20AI2622 - Analog input module - B&R

X20AI2622

This B&R analog input module is reference X20AI2622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€280.00

X20AI4622 - Analog input module - B&R

X20AI4622

This B&R analog input module is reference X20AI4622. It belongs to the X20 range. • 2 analog inputs • Either current or voltage signal • 13-bit digital converter resolution This B&R input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€160.00

X20BM11 - Bus module - B&R

X20BM11

This B&R bus module is reference X20BM11. It belongs to the X20 range. The BM11 bus module serves as the base for all 24 VDC X20 I/O modules. • Bus module for 24 VDC I/O modules • The internal I/O supply is inter connected This B&R bus module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€39.00

X20BT9100 - Bus transmitter - B&R

X20BT9100

This B&R bus transmitter is reference X20BT9100. It belongs to the X20 range. The bus transmitter BT9100 provides for the seamless expansion of the X20 system. The stations can be up to 100m away from each other. • X2X Link bus transmitter • For seamless expansion of the systems • Up to 100 m segment lengths • Feed for internal I/O power supply This...

€89.00

X20ZF0000 - Dummy Module - B&R

X20ZF0000

This B&R dummy module is reference X20BT9100. It belongs to the X20 range. • Place holder for later system expansion • Used as a terminal holder • Module with no electrical function This B&R dummy module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€85.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00