Catalog

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

KCP1 69-000-398 - Teach Pendant - KUKA

KCP1 69-000-398

This KCP1 69-000-398 and KUKA brand Teach Pendant is a control panel for the KUKA KR 60 P, KR 100 P and KR 350 robot cabinets. The KR 100 PA and KR 160 PA robots can optionally be equipped with the KR C1 A control This Teach Pendant KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

A06B-6050-H103 - Velocity Control Unit - FANUC

A06B-6050-H103

This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€600.00

KCP1 69-000-399 - Teach Pendant - KUKA

KCP1 69-000-399

This KCP1 69-000-399 and KUKA brand Teach Pendant is a control panel for the KUKA KR 60 P, KR 100 P and KR 350 robot cabinets. The KR 100 PA and KR 160 PA robots can optionally be equipped with the KR C1 A control This Teach Pendant KUKA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

PCD4-E110 - Inputs module - SAIA

PCD4-E110

This SAIA input module is reference PCD4-E110. It is part of the PCD4 range. 24 Volts, 8mA / Positive or negative logic. 16 entries. This SAIA all-or-nothing (TOR) input module is available to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (100% test).

€240.00