Catalog

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

JANCD-YEW01-E - Interface board - YASKAWA

JANCD-YEW01-E

This JANCD-YEW01-E and YASKAWA interface board is an interface board for DX200 robot control unit. This board can connect an analog arc control welding power source to the DX200. This JANCD-YEW01-E YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€790.00

25C-V2P5N104 - Variable speed drive - ALLEN BRADLEY

25C-V2P5N104

This reference speed controller 25C-V2P5N104 and brand ALLEN BRADLEY is a drive from the POWERFLEX 527 series. Variable speed drive : 0.4kW, 2.5A, 100 to 120V, 50 / 60Hz, Single phase input, three phase output 0 to 230V. This ALLEN BRADLEY speed controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€380.00

XPSMC16ZC - Safety Controller - TELEMECANIQUE

XPSMC16ZC

This TELEMECANIQUE brand safety controller with reference XPSMC16ZC belongs to the XPS-MC range. 24Vdc - 16 inputs - signal. 32 LEDs - CANopen This Télémécanique XPSMC16ZC module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,970.00

XPSMC16Z - Safety Controller - TELEMECANIQUE

XPSMC16Z

This TELEMECANIQUE brand safety controller with reference XPSMC16Z belongs to the XPS-MC range. 24Vcc - 16 entrées - signal. 30 DEL This Télémécanique XPSMC16Z module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€920.00

XPSMC16ZP - Safety Controller - TELEMECANIQUE

XPSMC16ZP

This TELEMECANIQUE brand safety controller with reference XPSMC16ZP belongs to the XPS-MC range. 24Vcc - 16 entrées - signal. 32 DEL This Télémécanique XPSMC16ZP module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€510.00

XPSMC32Z - Safety Controller - TELEMECANIQUE

XPSMC32Z

This TELEMECANIQUE brand safety controller with reference XPSMC32Z belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 46 DEL This Télémécanique XPSMC32Z module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,545.00

XPSMC32ZC - Safety Controller - TELEMECANIQUE

XPSMC32ZC

This TELEMECANIQUE brand safety controller with reference XPSMC32ZC belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 48 DEL - CANOPEN This Télémécanique XPSMC32ZC module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,900.00

XPSMC32ZP - Safety Controller - TELEMECANIQUE

XPSMC32ZP

This TELEMECANIQUE brand safety controller with reference XPSMC32ZP belongs to the XPS-MC range. 24Vcc - 32 entrées - signal. 48 DEL This Télémécanique XPSMC32ZP module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€2,318.00