Catalog

Showing 1-29 of 29 item(s)

On sale!

S30A-4011CA - Laser Scanner - SICK

S30A-4011CA

This S3000 series laser scanner has four protection fields and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. This SICK S30A-4011CA scanner is at your disposal to replace your defective equipment.

€2,585.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

S30A-4011BA - Laser Scanner - SICK

S30A-4011BA

This S3000 Series safety laser scanner features 1 protective field set and four servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 4 meters This SICK S30A-4011BA scanner is at your disposal to replace your defective...

€2,220.00

S30A-7011CA - Laser Scanner - SICK

S30A-7011CA

This S3000 series safety laser scanner features 4 protective field sets and 12 control fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 m. This SICK S30A-7011CA scanner is at your disposal to replace your defective...

€715.00

S30A-6011EA - Laser Scanner - SICK

S30A-6011EA

This safety laser scanner can only be used in combination with the EFI system group, eg. with a Flexi Soft safety control system or another S300 or S3000 safety laser scanner. Range: 5.5 m This SICK S30A-6011EA scanner is at your disposal to replace your defective equipment.

€2,560.00

S30A-7011EA - Laser Scanner - SICK

S30A-7011EA

This S3000 Series safety laser scanner features 1 protective field set and 64 servo fields that are freely programmable using your SICK software. You can therefore configure your laser scanner according to the conditions of your installation. Protective Field range : 7 meters This SICK S30A-7011EA scanner is at your disposal to replace your defective...

€890.00

BWU2702 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2702

This BIHL+WIEDEMANN brand BWU2702 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€805.00

BWU2822 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2822

This BIHL+WIEDEMANN brand BWU2822 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi-3 masters, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety...

€1,450.00

BWU2793 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2793

This BIHL+WIEDEMANN brand BWU2793 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 31 2-channel safety...

€350.00

BWU2602 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2602

This BIHL+WIEDEMANN brand BWU2602 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€1,200.00

BWU2202 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2202

This BIHL+WIEDEMANN brand BWU2202 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) safety outputs), expandable to 16...

€840.00

BWU2204 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2204

This BIHL+WIEDEMANN brand BWU2204 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) electronic safety devices),...

€650.00

BWU2206 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2206

This BIHL+WIEDEMANN brand BWU2206 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, expandable to 62 2-channel safety inputs, 2 enable circuits (2 x 2 relay outputs), expandable to 16 safety outputs , diagnostics and configuration via Ethernet...

€250.00

BWU3053 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU3053

This BIHL+WIEDEMANN brand BWU3053 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range 24 volt ASi-3 PROFIBUS gateway in stainless steel, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, duplicate address detection, ASi fault check, IP20 This BIHL+WIEDEMANN brand BWU3053 module is at your disposal to replace your defective equipment.

€1,900.00

CP410M - 1SBP260181R1001 - HMI Terminal - ABB

CP410M - 1SBP260181R1001

This reference terminal CP410M - 1SBP260181R1001 and ABB brand is part of the AC500 range, CP400 series. 3", 16 levels of gray. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€900.00

CP415M - 1SBP260191R1001 - HMI Terminal - ABB

CP415M - 1SBP260191R1001

This reference terminal CP415M - 1SBP260191R1001 and ABB brand is part of the AC500 range, CP400 series. 3.5", 16 levels of gray. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€850.00

CP420B - 1SBP260182R1001 - HMI Terminal - ABB

CP420B - 1SBP260182R1001

This reference terminal CP420B - 1SBP260182R1001 and ABB brand is part of the AC500 range, CP400 series. 4.7", 16 levels of blue. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,600.00

CP430B - 1SBP260183R1001 - HMI Terminal - ABB

CP430B - 1SBP260183R1001

This reference terminal CP430B - 1SBP260183R1001 and ABB brand is part of the AC500 range, CP400 series. 5.7", 16 levels of blue. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,260.00

CP430BP - 1SBP260192R1001 - HMI Terminal - ABB

CP430BP - 1SBP260192R1001

This reference terminal CP430BP - 1SBP260192R1001 and ABB brand is part of the AC500 range, CP400 series. 5.7", 16 levels of blue. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€2,650.00

CP430BP-ETH - 1SBP260194R1001 - HMI Terminal - ABB

CP430BP-ETH - 1SBP260194R1001

This reference terminal CP430BP-ETH - 1SBP260194R1001 and ABB brand is part of the AC500 range, CP400 series. 5.7", 16 levels of blue. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,400.00

CP430T - 1SBP260195R1001 - HMI Terminal - ABB

CP430T - 1SBP260195R1001

This reference terminal CP430T - 1SBP260195R1001 and ABB brand is part of the AC500 range, CP400 series. 5.7", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,550.00

CP430T-ETH - 1SBP260196R1001 - HMI Terminal - ABB

CP430T-ETH - 1SBP260196R1001

This reference terminal CP430T-ETH - 1SBP260196R1001 and ABB brand is part of the AC500 range, CP400 series. 5.7", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,900.00

CP435T - 1SBP260193R1001 - HMI Terminal - ABB

CP435T - 1SBP260193R1001

This reference terminal CP435T - 1SBP260193R1001 and ABB brand is part of the AC500 range, CP400 series. 7", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€3,200.00

CP435T-ETH - 1SBP260197R1001 - HMI Terminal - ABB

CP435T-ETH - 1SBP260197R1001

This reference terminal CP435T-ETH - 1SBP260197R1001 and ABB brand is part of the AC500 range, CP400 series. 7", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€2,850.00

CP440C-ETH - 1SBP260187R1001 - HMI Terminal - ABB

CP440C-ETH - 1SBP260187R1001

This reference terminal CP440C-ETH - 1SBP260187R1001 and ABB brand is part of the AC500 range, CP400 series. 7.5", 64000 color STN screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,950.00

CP450T - 1SBP260188R1001 - HMI Terminal - ABB

CP450T - 1SBP260188R1001

This reference terminal CP450T - 1SBP260188R1001 and ABB brand is part of the AC500 range, CP400 series. 10.4", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€1,700.00

CP450T-ETH - 1SBP260189R1001 - HMI Terminal - ABB

CP450T-ETH - 1SBP260189R1001

This reference terminal CP450T-ETH - 1SBP260189R1001 and ABB brand is part of the AC500 range, CP400 series. 10.4", 64000 color TFT screen. This ABB panel is at your disposal to replace your defective system and has a guarantee adapted to your needs.

€2,900.00